User manual PHILIPS AVENT SCD535

[. . . ] Register your product and get support at www. ς ES Manual del usuario FI Käyttöopas 5 20 35 52 71 87 102 IT Manuale utente NL Gebruiksaanwijzing NO Brukerhåndbok PT Manual do utilizador SV Användarhandbok TR Kullanım kılavuzu 118 134 150 165 182 197 FR Mode d’emploi 1 Congratulations on your purchase and welcome to Philips AVENT!To fully benefit from the support that Philips AVENT offers, register your product at www. Philips AVENT is dedicated to producing caring, reliable products that give parents the reassurance they need. [. . . ] €24) 1 Minimum sensitivity level 2 Maximum sensitivity level 4 Press the OK button to confirm. •• The message ‘Saved’ appears on the display. D Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and therefore transmits more often. As a result, the units consume more power and the operating time of the battery is shorter. 7 Setting room temperature range D Note: You can only adjust the temperature range in the menu of the parent unit. A baby will sleep comfortably in a room heated to a temperature between 16°C and 20°C. This is important, since a baby cannot regulate its body temperature as well as an adult. A baby needs more time to adjust to temperature changes. If you do not set a temperature range, the baby monitor alerts you when the temperature in your baby’s room drops below 14°C or rises above 35°C. In this case, the backlight of the parent unit display goes on and ‘High’ or ‘Low’ appears on the display. To change the default minimum and maximum temperature, follow the instructions below. D Note: The temperature of the baby’s room is shown on the display of both units when they are linked. 5 Set the desired minimum temperature with the + and - buttons. 7 Set the desired maximum temperature with the + and - buttons. 6 Sound alert on/off D Note: You can only switch the sound alert on and off in the menu of the parent unit. This feature allows you to monitor your baby silently. It enables you to switch off the volume on your parent unit and still be alerted if your baby cries. If the sound alert is switched on, the parent unit beeps as soon as the fourth sound level light lights up while the volume is switched off. In addition, the backlight of the parent unit display goes on and the sound alert symbol ( g) flashes on the display. 5 Adjusting microphone sensitivity 5 If the alert is off, the display shows ‘On?Press the OK button to switch on the alert. If the alert is on, the display shows ‘Off? [. . . ] 3 Tryk på tasten + en eller flere gange for at vælge en af de fem vuggeviser fra listen eller for at vælge “Play all” (Afspil alle). Følg nedenstående instruktioner for at ændre standardindstillingen for minimum- og maksimumtemperatur. Hvis vibrationsalarmen er tændt, vibrerer forældreenheden, så snart den fjerde indikator for lydniveauet lyser, mens der er slukket for lyden. Tryk på OK for at slukke for vibrationsalarmen. [. . . ]