User manual PHILIPS 105S56

[. . . ] do not place the monitor on a bed , sofa , rug , or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. [. . . ] Plug the signal cable's 15-pin connector into the computer's video port and tighten the two screws on the cable connector. Caution:Don't bend the signal cable, otherwise it will break the inner wire. Connecting the Power Cord: Plug the power cord into the monitor's AC power socket. Then plug the power cord into a grounded AC outlet or ULapproved power strip or the power output socket on your PC. Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. Your monitor features a unique quick switch system which provides a picture within seconds after the monitor is switched on. Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock. Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. Power Switch: Press this knob to switch ON/OFF of monitor's power. Note: If adjustment or selection of any OSD menu is not made for more Than 10 seconds, the current setup will be saved and the OSD will disappear automatically. [. . . ] The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. the Philips guarantee may not apply if: · The documents have been altered in any way or made illegible; · The model or production number on the product has been altered, deleted, removed or made illegible; · Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country. [. . . ]