User manual PHILIPS 107B75

[. . . ] electronic user's manual file:///D|/EDFU/crt_17_6/edoc/english/107B/manual. html2005-05-19 ¤W¤È 10:16:07 Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance · Troubleshooting · Regulatory Information · Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q q q q q q q Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time. Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. [. . . ] From the menu that appears, choose 'Save Link As. . . ', 'Save Target As. . . ' or 'Download Link to Disk'. Choose where you would like to save the image; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1. With the manual file open, follow your printer's instructions and print the pages you need. 107B. pdf 107C. pdf 107E. pdf 107G. pdf 107H. pdf English language manual file:///D|/EDFU/crt_17_6/edoc/english/DOWNLOAD/DOWNLOAD. HTM (1 of 2)2005-05-19 ¤W¤È 10:16:28 Download and Print 107S. pdf 107T. pdf 107Q. pdf file:///D|/EDFU/crt_17_6/edoc/english/DOWNLOAD/DOWNLOAD. HTM (2 of 2)2005-05-19 ¤W¤È 10:16:28 Troubleshooting Troubleshooting Safety Precautions and Maintenance · Troubleshooting · Regulatory Information · Other Related Information Common Problems Having trouble?Before calling for help, try these suggestions. Having this problem? q Check these items No Picture q (Power LED not lit) q Make sure the Power cable is plugged into the power outlet and back of the monitor. Power button in the front of your monitor should be in the ON position. Disconnect the monitor from the power outlet for about one minute. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. The Energy Saving feature may be activated Make sure the Brightness and Contrast controls are set correctly. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. Make sure the computer Power button is on. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. Make sure the computer is turned on. No Picture (Power LED is flashing green) q q q q q No Picture q (Power LED is green) q q Screen doesn't show when you turn on the monitor q q q file:///D|/EDFU/crt_17_6/edoc/english/107B/SAFETY/saf_troub. htm (1 of 3)2005-05-19 ¤W¤È 10:16:40 Troubleshooting No color or intermittent color q If you are using a non-VESA-DDC standard video card, turn the DDC1 / 2B feature Off. Face the monitor toward the East for the best picture quality. Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. Adjust the Brightness and Contrast controls. Check your video card and it's owner's manual instructions for it may be a non-VESA-DDC Standard card. Adjust the Horizontal and/or Vertical Size. Eliminate the use of a video extension cable and/or video switch box. [. . . ] Next, press the (-)or (+) button to adjust the color blue. 6d) When all adjustments are complete, press the MENU button to confirm your adjustments and press MENU return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RETURN TO TOP OF THE PAGE RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets. 1) Press the MENU button on the monitor. [. . . ]