User manual PHILIPS 1255X

[. . . ] 1290X 1280X 1280XCC 1260X 1250X 1250XCC Rechargeable Cordless Tripleheader Razor Register your product and get support at (Model 1290X Shown) www. Com/norelco 2 ENGLISH 4 1290X/1280X/1280XCC/1260X/1250X/1250XCC Congratulations on your purchase and welcome to Philips Norelco!To fully benefit from the support that Philips Norelco offers, register your product at www. Com/norelco 4 ENGLISH ENGLISH 5 IMPORTANT SAFETY INSTRUCTIONS precautions should always When using an electric appliance, basic be followed, including the following: Read all instructions before using this appliance. [. . . ] C 8 Deactivating the travel lock 1 2 Press the ON/OFF button for 3 seconds. The lock symbol goes out and the razor turns ON to indicate that the razor has been unlocked. Travel Lock (1280X, 1280XCC, 1260X, 1250X and 1250XCC) If you are going to store the razor for a longer time period or if traveling, it is possible to lock the razor. The travel lock prevents the razor from being switched on by accident. BThe razor unlocks automatically when charging in the charging stand or Jet Clean System. Cleaning Always clean your razor after each use. regular cleaning guarantees better shaving results. 26 ENGLISH Never clean, remove or replace shaving unit while motor is on. Do not apply pressure to shaving head combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs. Do not use razor if shaving head combs are damaged or broken. Do not use abrasives, scourers or aggresive liquids such as gasoline or acetone to clean the razor or Jet Clean System. ENGLISH 27 C C 3 Using your thumb and forefinger, grasp the sides of the shaving head near the center of the shaving unit and pull each individual shaving head open. Rinse all three shaving heads and three hair chambers under hot tap water by letting the water run in and around all the openings for at least 30 seconds. C F 4 Cleaning the Shaving Unit The razor heads may be quickly cleaned after each use by rinsing with hot water. Water from the tap should be on a hot setting, BUT BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. regular cleaning guarantees better shaving results. While rinsing razor heads, water may drip out of the base of razor. 1 Always turn razor OFF, remove from charging stand/Jet Clean System before cleaning. Rinse the shaving unit by running under hot water for a few minutes. bE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS. 5 6 You can also brush the shaving heads and hair chambers with the brush supplied. [. . . ] mINUTES LEFT MINUTES LEFT This razor/charging stand/Jet Clean System has no other user-serviceable parts. Maintenance Always remove razor from the charging stand/ Jet Clean System before cleaning appliance. Unplug the charging stand/Jet Clean System after charging/recharging or cleaning razor. The charging stand/Jet Clean System and razor may be wiped clean using a damp cloth. [. . . ]