User manual PHILIPS 164069316

[. . . ] If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. · Never place the product and accessories near naked flames or other heat sources, including direct sunlight. · Never insert objects into the ventilation slots or other openings on the product. [. . . ] Handle with care to avoid injury and damage. · Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. · Do not mix batteries (old and new or carbon and alkaline, etc. ). · Remove batteries if they are exhausted or if the remote control is not to be used for a long time. · Batteries contain chemical substances, they should be disposed of properly. · The product/remote control may contain a coin type battery, which can be swallowed. Keep the battery out of reach of children at all times! EN 5 English Care for your product Use only microfiber cloth to clean the product. 4 Your SoundBar Care of the environment Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your SoundBar at www. philips. com/welcome. Main unit Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. 1 2 When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Close the battery compartment. 8 EN Connect Connect your subwoofer to your SoundBar as described in the quick start guide. Rear right English AC MAINS~ Connectors Connect other devices to your SoundBar. Side right AC MAINS~ Connect to the power supply. Connect audio from TV and other devices Play audio from TV or other devices through your SoundBar. Use the best quality connection available on other devices. MUSIC iLINK Audio input from an MP3 player. · If you play audio from the TV through your SoundBar, make sure that the TV is muted. L (WHITE) AUX R (RED) AUDIO IN SUBWOOFER (8) · The audio connections in this user manual are Rear left COAXIAL OPTICAL DIGITAL IN 1 2 3 4 a SUBWOOFER Connect to the supplied subwoofer. Connect to an analog audio output on the TV or an analog device. Connect to a coaxial audio output on the TV or a digital device. Connect to an optical audio output on the TV or a digital device. Before you start TV · Select `PCM' or `Standard' from the TV audio menu. Other devices (DVD player, Blu-ray player, etc) · Select `PCM' from the audio output of the device. For details, see the user manual of the device. b AUDIO IN-AUX Option 1: Connect audio through a digital optical cable Best quality audio Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the device. The digital optical connector might be labeled SPDIF, SPDIF OUT, or OPTICAL. c DIGITAL IN-COAXIAL d DIGITAL IN-OPTICAL EN 9 6 TV Use your SoundBar Option 2: Connect audio through a digital coaxial cable Good quality audio Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/ DIGITAL OUT connector on the device. The digital coaxial connector might be labeled DIGITAL AUDIO OUT. This section helps you use the SoundBar to play audio from connected devices. [. . . ] Within three seconds, press TREBLE+, VOL-, and BASS+. » When the restore factory settings process is complete, the standby indicator blinks five times. Your SoundBar automatically switches off and back on again. Change virtual surround mode Cirrus virtual technology (CVT)) creates a highly compelling 5. 1-channel listening experience from as few as two speakers. Press SURROUND repeatedly to switch CVT mode on or off. · On: AUX indicator on the front panel blinks twice. [. . . ]