User manual PHILIPS 21PT5507

[. . . ] TV Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . [. . . ] · Delta Volume*: this is used to compensate any volume discrepancies between the different programs or EXT sockets. This setting is available for programs 0 to 40 and the EXT sockets. · AVL* (Automatic Volume Leveller): this is used to limit increases in sound, especially on program change or advertising slots. · Store: this is used to store the sound settings. * Only available on certain versions. Feature settings & Press H, select Features (Ï) and press ¬. You can adjust: é Timer, Child Lock and Parental Cont. : see next page " Contrast +: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black. ` NR: attenuates picture noise (snow) in difficult reception conditions. Caution: to store the Contrast + and NR settings, use the Store choice in the Picture menu. ( To quit the menus, press d. 6 Timer function (only available on certain versions) This menu lets you use the TV set as an alarm. é With the cursor, select the Options menu then Timer : " Sleep: to select an automatic standby period. Mainge · Picture · Sound $ Features · Install Timer · Sleep $ Time Start Time Stop Time Program No. Activate 10:56 · · · · This setting is also available via the ` key on the remote control. Note: the time is updated automatically each time the TV set is switched on via the teletext information on programme 1. If this programme does not have teletext, the update will not take place. ( Start Time: enter the start time. § Stop Time: enter the standby time. è Program No. : enter the number of the programme for the wake-up alarm. For models equipped with a radio, you can select an FM station by using the Ȭ keys (the 09 keys are only used to select TV programs). Activate: the settings include: · Once for a single alarm, · Daily for each day, · Stop to cancel. ç Press b to put the TV set in standby. It will automatically come on at the time programmed. If you leave the TV set on, it will just change programmes at the time entered (and will go to standby mode at the Stop Time). By combining the TV lock and Timer functions, you can restrict the period during which the TV set is used, for example by your children. TV lock (only available on certain versions) You can block certain programs or inhibit use of the TV set completely by locking the keys. The first time you enter this, enter code 0711 twice and then enter your new code choice. Parental Cont. : Use the îÏ keys to select the TV programme required and validate with ¬. The + symbol will be displayed opposite the programmes or sockets that are locked. [. . . ] Using these signals provides better picture quality. S-VHS Signals: These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards. The luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal. NICAM sound: Process by which digital sound can be transmitted. System: Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and L L'. The SYSTEM setting (p. [. . . ]