User manual PHILIPS 32HFL5007D

[. . . ] Guests) from deleting or changing program settings and/or modifying picture and sound settings. This ensures that TVs are always set up correctly. a switch-on volume and programme can be selected. After switching on, the TV will always start on the specified program and volume level. [. . . ] You will have to wait for a while before you press the key to allow the software download to complete. If you press the key before the download is complete, there will be a short delay before the teletext screen is displayed. While navigating the digital teletext, there is a short delay while the page downloads. A prompt or message is often broadcast on the page to let you know the progress. Only Digital teletext services differ greatly from analogue teletext. When you switch to a Digital teletext service, the images you see contain graphics and text which are laid out and controlled in a manner decided by the broadcaster. Some digital channels, which you select like any other channel, offer dedicated teletext services. Some digital channels also offer information on the programme being broadcast (a message or an instruction may appear on the screen). under certain circumstances , Digital text or interactive services may have priority over subtitles. This can result in the subtitles not automatically reapperaing when leaving Digital text or interactive services on a channel which is broadcasting subtitles. In these cases, subtiltes can be intialised either by toggling the key on the remote control or by changing channel. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them. note You cannot change the Language or Country in Analogue mode. If you want to change the Language or Country, you have to exit Analogue mode and enter into Digital mode to do so (refer to "Preferences"on page 18). 2 Press the Î / ï key repeatedly to select Install and the Æ / key to enter the Install menu. 3 Press the ï key to select Auto Store and the Æ / key to start automatic searching of the channels. all the available TV programmes will be stored. The display shows the progress of the search and the number of programmes found. This menu is used to store the programmes one at a time. 2 Press the Î ï keys repeatedly to select Install and the Æ / key to enter the Install menu. 3 Press the ï key to select Manual Store and the Æ / enter Manual Store menu. [. . . ] Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. press the "MENU" Key on the SmartLoader. The Master TV will show the following menu: SMARTLOADER TO TV > TV TO SMARTLOADER > On the TV screen, highlight the menu option "TV TO SMARTLOADER" Press the right arrow key on the SmartLoader to start the programming process A number display (from 0~100) will be shown on screen, indicating the percentage of the programming progress from the TV to the SmartLoader. when the programming is completed , "##" will show "100" and the message "DONE" will appear. [. . . ]