User manual PHILIPS 40735-11-16

[. . . ] If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) Do not subject the LCD monitor to severe vibration or high impact conditions during operation. [. . . ] These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTS MODEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 19S1 3 1 0 >15mm 3 BLACK DOT DEFECTS MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 19S1 5 or fewer 2 or fewer 0 >15mm 5 or fewer TOTAL DOT DEFECTS MODEL Total bright or black dot defects of all types Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect ACCEPTABLE LEVEL 19S1 5 or fewer RETURN TO TOP OF THE PAGE · Product Information · Philips Pixel Defect Policy · Philips SmartControl ll · System support and requirement · Installation · Start to use · Q&A SmartControl II (Selective Models) Philips SmartControl II SmartControl II is monitor-based software with an easy-to-use on-screen graphic interface that guides you through fine-tuning resolution, color calibration and other display settings including brightness, contrast, clock & phase, position, RGB, white point and - on models with onboard speakers volume adjustments. System support and requirement: 1Sytem support: 2000, XP, NT 4. 0, XP 64 Edition, Vista 32/64. 2 . Language support: English, Simplified Chinese, German, Spanish, French, Italian, Russian, Portuguese. 3 . Philips Monitor support DDC/CI Interface. Installation: %Ï %Ï Follow the instruction and complete the installation. You can lauch after installation complete. If you want to launch later, you can either click the shortcut on desktop or toolbar. Start to use: 1. First launch -Wizard %Ï %Ï %Ï %Ï The first time after installation of SmartControl II, it will automatically go to Wizard for first time launch. The wizard will guide you through adjustment your monitor performance step by step. You can go to Plug-in menu to launch wizard later on as well. You can adjust more options without wizard by Standard pane. Wizard Analog Sequence Resolution Focus Brightness Contrast Position White Point (Color Temp) File Wizard Digital Sequence Resolution Contrast Brightness White Point (Color Temp) File - 2. Start with Standard pane: Adjust menu: %Ï %Ï Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. 3 . Entering incorrect PIN results in the following dialog box: Options>Preferences - Will only be active when selecting Preferences from the drop-down Options menu. On a nonsupported display capable of DDC/CI, only the Help and Options tabs are available. 1Displays current preference settings. 3 . Enable Context Menu on desktop is checked (On) by default. Enable Context menu displays SmartControl II selections for Select Preset and Tune 4 . Enable Task Tray icon is checked (On) by default. Enable context menu shows the task tray menu for SmartControl II. A right click on the task tray icon Display in the desktop right-click context menu. Disabled removes SmartControl II from the right click context menu. displays the menu options for Help, Technical Support. When Enable task tray menu is disabled, the task tray icon will only display EXIT. 5 . Run at Startup is checked (On) by default. When disabled, SmartControl II will not launch at start or be in the task tray. [. . . ] (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted. ) the model or production number on the product has been altered, deleted, removed or made illegible. Where IS SERVICE AVAILABLE?Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). Where CAN I GET MORE INFORMATION? [. . . ]