User manual PHILIPS 40PFL4907

[. . . ] Register your product and get support at www. Com/support 40PFL4907 EN User Manual ES Manual del Usuario FR Manuel d'Utilisation EN: For further assistance, call the customer support service in your country. Et Área Metropolitana; 58 87 97 36 Interior de la Republica; 01 800 839 19 89 2 English Contents 1 Notice 2 Important Positioning the TV Regulatory notices Environmental care 5 7 7 7 7 8 8 8 8 9 9 9 10 11 11 12 12 13 15 15 15 15 16 16 17 17 19 20 22 23 25 25 25 26 26 27 29 30 32 33 33 34 34 36 36 36 37 38 38 40 43 Software Checking your current software version Preparing for the software upgrade Upgrading the software Automatically check for latest software Netflix deactivation Netflix ESN VUDU deactivation YouTube deactivation 43 43 43 44 44 44 44 44 44 45 45 45 49 49 49 52 52 52 53 54 end of book 3 Getstarted Features Supplied accessories Symbols used in this User Manual Attaching the base Managing cables Installing the remote control batteries Remote control function Control panel Terminals Connecting the antenna or the cable Plugging in the AC power cord Initial setup 6 Connectingdevices Selecting your connection quality Connecting your devices 7 Usefultips FAQ Troubleshooting 8 Information Glossary Maintenance 4 UseyourTV Switching on your TV and putting it in Standby mode Adjusting volume Switching channels Watching channels from an external device Access the Home menu Philips Wireless MediaConnect View photos, play music and watch videos using DLNA Net TV Enjoying vTuner Pandora® operations Using Twitter Using auto mode Create and use lists of favorite channels Sleep timer Changing picture format TV screen information USB 9 Specifications 10Warranty License 5 UsemoreofyourTV Picture Sound Features Caption settings Sleeptimer Child and ratings lock Change PIN Installation Language Channel installation Preferences Use Philips EasyLink Network Return your settings to default values 3 English Return your Product Registration Card or visit at http://www. Com/philips/ today to get the very most from your purchase. [. . . ] Allclear : Clear all the entered numbers or words. Language Channels Preferences Network Reset AV settings English Autoprogram Location Network settings assi Start now Scan Manualentry 1 *1 WPS (Easy Connect) cannot be used when the security protocol is set to WEP. Change the Access Point's security mode from WEP to WPA or WPA2 (recommended). Picture Sound Features Installation Software Wiredsetting Select to use an Ethernet cable to connect to the Internet by wired connection. Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment. 42 Manualnetworksettings 2 Networksettingsassistant Before you proceed to Connectiontest or other settings in Network section, set this selection to suit your preference. Use to select Manualnetworksettings, then press OK. wireless IP setting mode Proxy setting Network settings assistant Network selection Connection test Setting status Reset network settings IP configuration Proxy configuration Manual network settings Wireless network setting Auto 2 Use to select Networksettingsassistant , then press OK. Network settings assistant Start now Manual network settings Network selection Connection test Setting status Start now Information Start now Language Channels Preferences Network Reset AV settings Reset network settings Networkselection 3 4 Use to select Networkselection, then press OK. Use to select the desired setting, then press OK. Wired If you connect to an Ethernet cable, select Wired to connect to the Internet. If you have a router with WPS function, select Wireless to connect to the Internet. 41 Wirelessnetworksetting This menu is displayed only when you set Wireless in Networkselection. In order to use a wireless network, you must set up a connection to the AP (e. English ManuallyenteryourSSID Set up the connection to the AP (e. 4 5 Auto Search for wireless networks automatically and select the SSID from the list. Use to select the appropriate the SSID, then press OK. Use to select the authentication setting of the selected wireless network. For a wireless network with authentication setting, select the authentication setting, according to the security type of the wireless network. selectsecuritytypefor "Router1" Auto Manually enter your S None WEP WPA-PSK WPA2-PSK Back · If you select the SSID with , WEP*2 /WPA /WPA2 Key entry screen will appear. Enter the WEP*2 / WPA /WPA2 key of the selected wireless network using , then press OK. If you select the SSID has a WPS, the WPS setting screen will appear. [. . . ] If Recipient learns of any third party claim that any disposition of Covered Code and/or functionality wholly or partially infringes the third party's intellectual property rights, Recipient will promptly notify SGI of such claim. SGI may publish revised and/or new versions of the License from time to time, each with a distinguishing version number. Once Covered Code has been published under a particular version of the License, Recipient may, for the duration of the license, continue to use it under the terms of that version, or choose to use such Covered Code under the terms of any subsequent version published by SGI. Subject to the provisions of Sections 3 and 4 of this License, only SGI may modify the terms applicable to Covered Code created under this License. [. . . ]