User manual PHILIPS 42FD9954-69C

[. . . ] 1015. 5 cover 03-10-2003 11:48 Pagina 2 CVBS B/Pb/Cb H L L L VGA 1 R RS232 ~ MAINS DVI-D VGA 2 AUDIO IN VGA 2 RC-OUT R R G/Y/Y R/Pr/Cr AV3 V AUDIO IN VGA 1 DVI-D Y/C S-VHS AUDIO IN AUDIO IN AV2 AV1 1 2 1015. 5 en 12-11-2003 11:12 Pagina 1 Unpacking and wall mounting instructions For the unpacking instructions follow the illustrated steps printed on the packaging (outside and inside). For the wall mounting instructions follow the illustrated steps ` to § printed on the separate template and in the supplied booklet. Make sure that the wall mount is being fixed securely enough so that it meets safety standards. The weight of the monitor (excl. packaging) is about 24 kg, 30 kg or 35. 5 kg, depending on the screen size (32", 37" or 42"). [. . . ] Zoom factor Select Zoom factor and press the cursor left/right to adjust the zoom factor and to change the magnification of the picture. If zoom is not active, changing the magnification factor will have no effect on the displayed picture. Format (only available in 4:3 VGA mode and SD video mode) Select Format to summon a list of available display formats. Press the cursor up/down to select another display format: 4:3, Movie expand 16:9 or Wide screen. Note: Movie expand 16:9 is not available in VGA mode. SD video-mode Shift (only available in VGA mode on VGA1 or VGA2 and in one of the HD modes. 7. ) This control allows you, when necessary, to move the picture in a horizontal or vertical way. VGA-mode + HD video mode Picture 2 (Format) Zoom Zoom factor (Shift) (Clock frequency) (Phase) (Auto align) q 4:3 Wide screen Z Â < S fi X 4:3 VGA-mode 4:3 4:3 & é Use the cursor left/right, up/down to adjust. Press the OK button when done. Wide screen Movie expand 16:9 Clock frequency (only available in VGA mode on VGA 1 or VGA 2. 7. ) This control allows you, when necessary, to adjust the values of the clock frequency so that especially text can be displayed with an optimal overall sharpness. Use the cursor left/right to adjust. Wide screen Phase (only available in VGA mode on VGA 1 or VGA 2. 7. ) This control allows you, when necessary, to adjust the pixel phase of the picture to avoid picture interference. Use the cursor left/right to adjust. Auto align (only available in VGA mode on VGA1 or VGA2 and in one of the HD modes. 7. ) This control allows you to automatically adjust the shift, the clock frequency and the phase in VGA mode and the shift in HD modes. Press OK to execute. Use of the menus 5 1015. 5 en 12-11-2003 11:12 Pagina 6 Sound menu Sound M Volume V Bass Treble + Sound mode J Volume This control allows you to adjust the volume level of the sound from the speakers. Bass Bass attenuates or amplifies the low-frequency response of the sound from the loudspeakers. Treble Treble attenuates or amplifies the high-frequency response of the sound from the loudspeakers. Sound mode This control allows you to switch between mono and stereo sound. Note: Bass, Treble and Sound mode will not be available in VGA loop through mode, i. e. when an electronic receiver box is connected to the monitor and a VGA source is selected. Setup menu Language Setup º Language Power savings US English English Nederlands Deutsch Français Español ) AV3 ( VGA2 § & é " Use the cursor down to select Language. Press the cursor right to enter the list of selectable languages. Use the cursor up/down to scroll through the list and to bring up other languages which are not displayed on the screen at present. Note: Only with the US English language, the menu items will be displayed with additional icons. [. . . ] Control of peripheral equipment The infrared radiation of the screen may influence the reception sensitivity of other peripherals. Solution: replace the batteries of the remote control or change position of other equipment. keep away a wireless headphone from within a radius of 4. 92 ft. No stable or not synchronized VGA picture Check if you have selected the correct display mode in your PC. [. . . ]