User manual PHILIPS 43259-48-16

[. . . ] • Remove the battery when the clock radio is not used for a long time. • The battery shall not be exposed to excessive heat such as sunshine, fire or the like. This clock radio shall not be exposed to dripping or splashing. Do not place any sources of danger on the clock radio (e. g. [. . . ] liquid filled objects, lighted candles). Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Caution • • Risk of product damage!Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. When you unplug the power adapter, always pull the plug from the socket. Never pull the cord. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. 4 Switch the slider to OFF to turn off the radio. Option 1 :USB socket (Fig. Note ) 2 Your clock radio Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. 5 Set alarm timer • The USB cable is not supplied. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips. com/support). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the unit is connected properly. • Ensure that there is power at the AC outlet. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception • Increase the distance between the unit and your TV or VCR. Alarm does not work • Set the clock/alarm correctly. [. . . ] Alarm does not work • Set the clock/alarm correctly. Clock/alarm setting erased • Power has been interrupted or the power plug has been disconnected. No charging • Use the USB cable bypacked with your device for charging. What’s in the box Check and identify the contents of your package. ) Set alarm Follow the illustration to set the alarm (Fig. [. . . ]