User manual PHILIPS 56230-48-16

[. . . ] 2 Move the shaving heads over your skin. Make both straight and circular movements (Fig. 4 Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. [. . . ] Contact the Consumer Care Centre in your country about the availability in your country. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch off the shaver. 3 Press the release button (1) and remove the shaving unit (2) (Fig. 4 Clean the inside of the hair chamber with the cleaning brush (Fig. 5 Clean the inside of the shaving unit with the cleaning brush (Fig. Every two months: shaving heads 1 Switch off the shaver. 2 Press the release button (1) and remove the shaving unit (2) (Fig. 3 To remove the retaining frame, push the sides of the central spring towards each other (1). Then lift the retaining frame out of the shaving unit (2) (Fig. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If there is no Consumer Care Centre in your country, go to your local Philips dealer. Guarantee restrictions The shaving heads (cutters and guards) are not covered by the terms of the international guarantee because they are subject to wear. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. Compliance with standards This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Preparing for use Inserting batteries The appliance runs on two R6 AA 1. Make sure that your hands are dry when you insert the batteries. First insert the top part of the lid (1) and then press down the bottom part (2) until you hear a click (Fig. How to avoid damage due to battery leakage Do not expose the appliance to temperatures higher than 35°C. [. . . ] How to avoid damage due to battery leakage Do not expose the appliance to temperatures higher than 35°C. Remove the batteries if you are not going to use the appliance for a month or more. Do not leave empty batteries in the appliance. shaving time Two new batteries offer a shaving time of 60 minutes. [. . . ]