User manual PHILIPS 57950-31-16

[. . . ] 2 Follow the onscreen instructions to complete the installation of Media Converter for Philips and Philips Device Manager. Connect and charge Your player will be charged when connected to the PC. A Connect to PC 1 Connect the supplied USB cable to the mini USB port at the bottom of the player, the other end to your PC. 2 The player will start to charge as soon as it is connected to your PC. 3 Charge your player for at least 5 hours before using it for the first time. The battery will be fully charged (100%) in 4 hours and 80% charged in 2 hours. 5 EN sa33xx_QSG_01eng. qxd 2007-08-02 3:08 PM Page 6 B Read the battery level indication of your player The approximate power levels of your battery are indicated as follows: Full Two-thirds full Half full Low Empty TIP When the batteries are almost empty, the low battery screen blinks. [. . . ] Your player will power down in less than 60 seconds. Your player will save all settings and un-finished recordings before it powers down. 3 Transfer A Your player appears as a USB mass storage in Windows Explorer. You can organize files, transfer music and pictures to your player during USB connection. Use Philips Media Converter to transfer video files. See Media Converter for details. Transfer music and pictures 1 Click and highlight one or more songs to transfer between your player and your computer. 2 Use drag and drop actions to complete your transfer. Tip To transfer music CDs to your player use software such as Musicmatch Jukebox or Windows Media Player, rip (convert) the songs on your music CD into MP3/WMA files. Copy the files into your digital audio player via Windows Explorer. Free versions of these programs can be downloaded from the internet. 6 sa33xx_QSG_01eng. qxd 2007-08-02 3:08 PM Page 7 1 Connect your player to the PC using the supplied USB cable. Your player will display the voice recording screen and voice recording starts automatically. Press 1 to stop and save the voice recording. Your voice recording will be saved on your player. (Filename format: VOICEXXX. WAV where XXX is the recording number which will be automatically generated. ) 5 You can find this file under > Recordings Library. TIP You can pause and restart a recording anytime with 2;. Play back recordings From the main menu, select > Recordings Library. 1 Select the recording you want to hear. 2 Press 2; to confirm. 10 sa33xx_QSG_01eng. qxd 2007-08-02 3:08 PM Page 11 Display lyrics You can display lyrics with your songs: Enable/disable the lyrics display by selecting "On/Off" respectively in the Settings > Lyrics. Troubleshooting How do I reset my player? Insert a pin or other pointed tool into the reset hole located at the bottom of the player. Hold until the player shuts down. If the above doesn't work, then you may have to use the Device Manager to recover your player: 1 2 3 4 5 Launch the Philips Device Manager at Start > Programs > Philips Digital Audio Player > SA33XX > Philips SA33XX Device Manager on your PC. Press and hold the 2; button while your player is connecting to the PC. [. . . ] Press and hold the 2; button while your player is connecting to the PC. Keep holding the key until the Philips Device Manager acknowledges your player and goes into recovery mode. Click the Repair button and follow the instructions given by the Device Manager. After the player has been repaired, disconnect it from your PC and re-start. 11 EN sa33xx_QSG_01eng. qxd 2007-08-02 3:08 PM Page 12 Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. [. . . ]