User manual PHILIPS 69141-53-PH

[. . . ] Safety instructions: Keep the plug and LivingColors away from liquids and humidity. - LivingColors is not a toy designed to be played with by children. - Do not place on hot surfaces - For safety reasons and under the terms of the warranty, the LivingColors and plug must not be opened. [. . . ] Environment: If you need to discard the appliance, dispose of it in accordance with instructions from the local authority. remove the batteries when you discard the remote control. Do not throw the batteries away with normal household waste. They must be handed in at an official collection point or at a Philips Dealer, both of which will dispose of the batteries in an environmentally friendly way. Problem LivingColors is not providing light Possible cause The lamp is not plugged in correctly Remote control is not working Solution Check the connections of the cord to the lamp Check that the plug is correctly placed in the wall socket See the following section Check the batteries in the remote control. The batteries should be correctly placed (+ and -) and should be charged. If the remote control is still not working, try replacing the batteries. link the remote to the LivingColors lamp by following the procedure under "2. Linking LivingColors lamps" Move LivingColors away from the wireless access point Make sure that all LivingColors connected to this remote are on; otherwise they will not respond after this action. LivingColors has been especially designed to create your own ambiance at home, through colour and light. If using LivingColors for the first time, please read these instructions carefully and save them for future reference. By following our guidelines, you will enjoy the full functionality of Philips LivingColors. important: -Carefully remove the parts from the packaging. Direct LivingColors towards the wall (the optimal distance is 50 cm), insert the connection plug into the lamp (drawing b), and then plug it into the wall socket. You can move your finger over the colour wheel to refine the colour (drawing d) -Changing the colour saturation (adding more white to the current colour). Press on ( ) for a deep colour or on ( ) for a more pastel colour (drawing e). Ultimately you will reach the white colour. LivingColors will remember your last colour setting for your next usage (drawing c). [. . . ] Automatic colour-changing mode Sweep your finger around the colour wheel (one full circle) and briefly press on "I" ("On"); LivingColors will then turn into the automatic colour-changing mode: the lamp will start changing colours automatically. You can adjust the speed with which colours change. Speed can be adjusted clockwise, from fast (dark blue colour on the colour wheel) to slow (purple) (drawing g). [. . . ]