User manual PHILIPS AX5112

[. . . ] · If the battery becomes empty soon after recharging, then either its contacts are dirty or it has reached the end of its lifetime. This set complies with the radio interference requirements of the European Community. Batteries (supplied or optionally available) You can use the following batteries with this CD-player: · normal batteries type LR6, UM3 or AA (preferably Philips), or · alkaline batteries type LR6, UM3 or AA (preferably Philips). Notes:­ Old and new or different types of batteries should not be combined. ­ Remove batteries if they are empty or if the player is not going to be used for a long time. Inserting batteries 1 Push OPEN 2 to open the CD lid. [. . . ] · Active mobile phones in the vicinity of the CD player may cause malfunctions. · Avoid dropping the unit as this may cause damage. Headphones HE205 · Connect the supplied headphones to the LINE OUT/p socket of the player. Playing a CD CD PLAY This CD-player can play all kinds of Audio Discs such as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD. 1 Push the OPEN 2 slider to open the player. 2 Insert an audio CD, printed side up, by pressing the CD onto the hub. 3 Close the player by pressing the lid down. CD RE W RIT AB LE CO M PA TIB LE EN OP VOL. 0 D T BB C RA K 4 Press 2; to switch the player on and start playback. yThe current track number and elapsed playing time are displayed. · You can pause playback by pressing 2;. yThe time at which playback was paused starts flashing. 2 Firmly connect the remote control to LINE OUT/p on the set. 3 Adjust the volume VOL E on the CD player and remote control. FEATURES Selecting a track and searching Selecting a track during playback · Briefly press or § once or several times to skip to the current, previous or next track. yPlayback continues with the selected track, and the track's number is displayed. Selecting a track when playback is stopped 1 Briefly press or § once or several times to select the desired track. yPlayback starts with the selected track. Searching for a passage during playback 1 Keep or § pressed to find a particular passage in a backward or forward direction. ySearching starts while playback continues at low volume. 2 Release the button when you reach the desired passage. yPlayback continues from this position. FEATURES Selecting different playing possibilities-MODE It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as required in B order to activate one of the following `modes'. The active mode is shown in the display. [. . . ] · If your lens has steamed up, wait a few minutes for this to clear. The indication nF diSC is displayed · CD-RW (CD-R) was not recorded properly. The indication HOLD is on and/or there is no reaction to controls · If HOLD is activated, then deactivate it. Disconnect power or remove batteries for a few seconds. [. . . ]