User manual PHILIPS CD610

[. . . ] Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] The next programmed track number will move up to this position and is displayed together with the step number and the remaining total program time. You can select tracks and store them either in the CD changer, or CD recorder memory. If you use the program for playback you can choose one of the two memories, else if you like to specify tracks for recording, use the CD changer memory only!4 Rotate ¡ JOG CONTROL TM (press the numerical keys on the remote control; for 2-digit numbers, press the keys in rapid succession) to select the required track numbers and store each track by pressing YES. The number of programmed tracks (STEP), PROG and the total program time are displayed. If you wish to program a complete CD from the CD Changer rotate ¡ JOG CONTROL TM to select CD1 (or 2, 3) ALL and press YES. Note: If the maximum number of programmable tracks is reached, the display shows PROGRAM FULL. ­ Recording from external CD player: ­ Digital ­ Digital (synchronized start with external CD player) ­ Analog ­ Finalizing discs: Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player ­ play a recorded CDRW on a CDRW compatible CD player · the recording procedure is the same for CDR and CDRW discs. Make sure that the CDR(W) is absolutely free of scratches and dust particles. It is advisable to use a CDRW disc for your first try. If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that recording can start from there. ­ Microphone recording: Mix sound from the internal CD Changer with microphone input (CD MIX MIC). You can adjust the reference record level for both digital and analog recordings. This is also possible when ALC is active. This feature can be used for fading your recordings in or out. 3 Rotate the ¡ JOG CONTROL TM to the left to adjust the desired record level. The record level is reset after the set has been switched to standby. ­ When Auto Track is on (default setting), track numbers will automatically be increased during recording. Note: If during recording ANALOG REC appears, the track is copy protected and will be recorded as analog, at normal speed. all other tracks will be copied normally (at double speed). Warning: No more recording possible after finalizing CDR discs!3 Press COMPILE CD to enter into the record mode. [. . . ] If you want to substitute the character: 2 Rotate ¡ JOG CONTROL TM (press the alphabet keys on the remote control) to select a new character. Note: If there are no discs in the text memory stored MEMORY EMPTY will be displayed. Erasing from the memory When the text memory of your CD recorder is full, the messages MEMORY FULL and FINALIZE DISC will be displayed. If you still want to add a new disc to the text memory, you have either to erase another disc from the memory or you have to finalize another disc. [. . . ]