User manual PHILIPS CDR770

[. . . ] Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. For Customer Use: Read carefully the information located at the back plate of your CD recorder/player and enter below the Serial N°. Retain this information for future reference. Thank you for buying this Philips Compact Disc Recorder. [. . . ] - Analog recording is always possible !- The number of recordings from the original is unlimited. Recordings from DAT or DCC players will not always stop automatically. Your recorder offers several recording modes. - RECORD DISC - to make a synchronized recording of the complete disc or a program simply by starting the source. - RECORD TRACK - to make a synchronized recording of a single track simply by starting the source. - REC(ord) MANUAL - to manually start a recording simply by pressing the RECORD key. - MAKE CD - to make a synchronized recording of the complete disc or a program simply by starting the source. Some remarks on recording: - When Auto track is ON (default setting), track numbers will automatically be increased during recording. - By programming the source first, a compilation can be recorded. If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. For recording from CD changers do not use REC MANUAL. § The CD recorder automatically starts to record and d lights continuously. ⷠIf, however, you start the source during a track, recording starts at the beginning of the next track or after 2. (This can also be done during recording) · The EASY JOG/ENTER key can be used to adjust the recording level. If STOP 9 was pressed within 3 seconds after pressing PLAY, no recording will take place. After recording the display will show UPDATE for several seconds. This feature enables you to make fast and easy recordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. in analog source material a silence of 2. 7 seconds or more is automatically detected as a track increment. [. . . ] 7 Press STORE/MENU to store a name you have entered and return to the submenu resume at 3 or STOP 9 to exit. - By pressing the EASY JOG/ENTER key or ENTER on the remote control without selecting a character first, you can insert a space between characters. - When an artist's name has been stored for a certain track, the name will automatically be copied for the next track. The name can be confirmed by pressing STORE/MENU or a new name can be entered as described above. [. . . ]