User manual PHILIPS CDR777

[. . . ] Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. For Customer Use: Read carefully the information located at the back plate of your CD recorder/player and enter below the Serial N°. Retain this information for future reference. 16 High speed recording from internal CD player. [. . . ] Preparing for Listen mode recording 1 Make sure that the recording disc is absolutely free of scratches and dust particles. After 3 seconds the display shows the remaining CDR(W) recording time on the left and total time of source on the right. (every 2 seconds PRESS RECORD is displayed) The left selection indicator is lit. FRECORDg lights continuously and the selected track or program is copied at normal speed. The track number and the recording time left will appear. § UPDATE lights up, fRECORDg goes out and recording stops. (Minimal track length must be 4 seconds otherwise silence will be added to the track. ) · If STOP was pressed within 3 seconds after RECORD, no recording will take place. After recording, the display shows UPDATE for several seconds. the Total time indications can differ slightly. Note: In this Recording mode, the Pause function is not operative. If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. If DOES NOT FIT appears on the display, there is not enough recording space left on the CDR(W) disc. You can press RECORD: only complete tracks that still fit on the CDR(W) will recorded. Or You can press PROG to select one or more tracks for recording (see programming): - rotate the EASY JOG/ENTER key to the required track number, then press the key (or ENTER on the remote control) 18 English Manual recording from external CD player MANUAL starts to flash and the display shows REC EXT MAN followed by WAIT. After a few seconds PRESS RECORD followed by the remaining time and track number appear on the display. 4 Play the source first to set the optimal recording level on the CD recorder. 5 Rotate the EASY JOG/ENTER key until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages. The track number and recording time left appear on the display. To record a 3-second silence at the start of a track, press PAUSE on the CD recorder before starting the source. (This can also be done during the recording. ) 2 To stop recording , press STOP on the CD recorder. [. . . ] ⷠWith the CANCEL key you can delete a character. § The display will ask you to reconfirm your selection. 7 Press STORE/MENU to store a name you have entered and return to the submenu resume at 3 or STOP 9 to exit. - By pressing the EASY JOG/ENTER key or ENTER on the remote control without selecting a character first, you can insert a space between characters. [. . . ]