User manual PHILIPS CDR951

[. . . ] Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. For Customer Use: Read carefully the information located at the back plate of your CD recorder/player and enter below the Serial N°. Retain this information for future reference. Thank you for buying this Philips Compact Disc Recorder. [. . . ] You will soon discover how easy it is to make your own CDs. Nevertheless, it is advisable to use a CDRW disc for your first try. ⷠIf the disc is a CDRW and is already finalized you must unfinalize it first. If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that recording can start from there. ⷠThere must be at least 7 seconds of recording time left on the disc, otherwise you will not be able to enter record standby mode. If the display indicates COPY PROTECT, no digital recording can be made of the source material. The Serial Copy Management System (SCMS) only allows digital recording under specific conditions: - This means that it is not possible to make a digital copy from a digital copy. - Analog recording is always possible !- The number of recordings from the original is unlimited. Recordings from DAT or DCC players will not always stop automatically. Your recorder offers several recording modes. - RECORD DISC - to make a synchronized recording of the complete disc or a program simply by starting the source. - RECORD TRACK - to make a synchronized recording of a single track simply by starting the source. - REC(ord) MANUAL - to manually start a recording simply by pressing the RECORD key. - MAKE CD - to make a synchronized recording of the complete disc or a program simply by starting the source. Some remarks on recording: - When Auto track is ON (default setting), track numbers will automatically be increased during recording. - By programming the source first, a compilation can be recorded. If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. For recording from CD changers do not use REC MANUAL. § The CD recorder automatically starts to record and d lights continuously. ⷠIf, however, you start the source during a track, recording starts at the beginning of the next track or after 2. (This can also be done during recording) · If STOP 9 was pressed within 3 seconds after pressing PLAY, no recording will take place. [. . . ] - When an artist's name has been stored for a certain track, the name will automatically be copied for the next track. The name can be confirmed by pressing STORE/MENU or a new name can be entered as described above. § The display will ask you to reconfirm your selection. 5 Select the characters by rotating the EASY JOG/ENTER key or by pressing the corresponding numeric/alphabet key on the remote control. [. . . ]