User manual PHILIPS CE132/10 QUICK STARTING GUIDE

[. . . ] Press and hold to rewind a track or search forward fast. press repeatedly to display available information about the current track. Note EN ES User manual Manual del usuario • • • • • • • • • • • • This system is designed for negative ground (earth) 12V DC operation only. Always install this system in the car dashboard. [. . . ] Until the screen This product complies with the radio interference requirements of the European Community. 1 Check the car’s wiring carefully and connect them to the the supplied ISO male connectors. • 1 2 3 Switch the source to [MP3--LINK]. Connect an MP3 link cable to • the MP3-LINK socket on the system. €¢ the audio output socket (usually the headphone socket) on the external device. Care of the environment Set clock 1 2 3 Press and hold Rotate Rotate until [CLK] is displayed. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. The following operations are applicable to all supported media. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Select a source 4 All registered and unregistered trademarks are property of their respective owners. 0 ISO male connectors 1 2 3 Green strip, black-edged green strip White strip, black-edged white strip Gray strip, black-edged gray strip Purple strip, black-edged purple strip Red strip Blue strip Blue strip, white strip Black strip Yellow strip Connect to Rear left speaker Front left speaker Front right speaker Rear right speaker Ignition key +12V DC when ON/ACC Motor/electric antenna relay control lead Amplifier relay control lead Ground To the +12V car battery which is energized at all times Note Slide the unit into the dashboard until you hear a “click”. €¢ • • [MP3--LINK]: Listen to the audio input through the MP3-LINK socket. 1 2 3 Press and hold to activate the setup of customized sound equalizer. EN 4 e f g h i 5 Listen to radio 9 1 Safety Store radio stations in memory Trademark notice Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. [. . . ] repeatedly until the target frequency is displayed. €¢ Specifications are subject to change without prior notice. When you contact Philips, make sure that the product is nearby and the model number and serial number are available. 1 Insert the notch on the front panel to the chassis on the main unit. [. . . ]