User manual PHILIPS CP9239

[. . . ] HQ6900 series User manual 2 ENGLISH 4 DANSK 13 DEUTSCH 21 ΕΛΛΗΝΙΚΑ 30 ESPAÑOL 39 SUOMI 48 FRANÇAIS 57 ITALIANO 66 NEDERLANDS 75 NORSK 84 PORTUGUÊS 93 SVENSKA 102 TÜRKÇE 111 HQ6900 series 4 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. The Close Cut system ensures a close and easy shave every day. For the best result, move the shaving heads over your skin in both straight and circular movements. [. . . ] Every month: shaving heads 1 Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button (1) and remove the shaving unit (2). 3 Turn the wheel anticlockwise (1) and remove the retaining frame (2). 4 Remove the shaving heads (cutters and guards) one by one and clean them with the cleaning brush supplied. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 5 Clean the cutter with the short-bristled side of the cleaning brush. Brush carefully in the direction of the arrow. 9 7 Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit, push it down (1) and turn the wheel clockwise (2). 8 Put the shaving unit back onto the shaver. Extra-thorough cleaning For extra-thorough cleaning, put the shaving heads in a degreasing liquid (e. To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads. Trimmer (HQ6996, HQ6990, HQ6976, HQ6950, HQ6946 only) Clean the trimmer every time you have used it. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. 2 Clean the trimmer with the cleaning brush supplied. Tip: Lubricate the trimmer teeth with a drop of sewing machine oil every six months. Storage 1 Put the protection cap on the shaver to prevent damage. 10 ENGLISH Replacement Replace the shaving heads every two years for optimal shaving results. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. [. . . ] €If you are unable to solve the problem with the information below, visit www. Com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country. 12 ENGLISH Possible cause The shaving heads are dirty. You have not cleaned the shaver well enough or you have not cleaned it for a long time. [. . . ]