User manual PHILIPS CT8558

[. . . ] Philips855_00_APMEA_DiscoverYourPhone_GB. fm Page 0 Friday, July 9, 2004 1:22 PM Discover your phone Back of the phone: camera lens and 4 000 colours external screen How to. . . Switch phone On/Off Enter PIN code Press ) to switch on, long press to switch off. Enter your PIN code using the keypad and press , or # to confirm. Press and hold either side key when in idle mode and when the phone is opened. Set the ringer volume A short press on the lower side key will mute the ringer when you receive a call. [. . . ] In this case, all parameters are communicated to you by your provider and/or operator as described below and must be entered as given. If included in your subscription, you simply have to enter the login, password and e-mail address of your e-mail account. In some cases, your operator might also be your e-mail service provider. Your phone might have been pre-configured. In this case, most parameters are already set and you don't have to change them (except for Login, Password and E-mail address which are up to you when creating an e-mail account). To enter text and numbers, including specific signs such as @ or %, see the characters table described page 19. Settings Network access This menu allows you to configure your phone and to handle the connection to the network, whether GSM or GPRS, in order to then connect to the appropriate server that will let you send and receive e-mails. All options described below are operator and/or subscription dependent. Press , , select Messages > E-mail > E-mail 1 > Settings and press , . Select Network Access and press , . Bearer This menu allows you to select the type of network used when launching a %HDUHU connection. GSM or GPRS: your mobile will only use the GSM or the GPRS network for e-mail connections. GPRS first: your mobile will first try to connect to the GPRS network, then to the GSM network if the GPRS network isn't available when connecting. Selecting this option you need to have both GSM and GPRS settings configured. 50 Messages Philips855_APMEA. book Page 51 Friday, July 9, 2004 1:05 PM GPRS settings This menu allows you to enter or change the GPRS settings *356 6HWWLQJV communicated to you by your operator, which are: APN, Login and Password. All settings must be entered as given to you by your operator. Error messages during connections are mainly due to incorrect parameters: you should contact your operator before first use, in order to have the appropriate GPRS parameters. Auto disconnection: allows you to select an inactivity time period after which the phone automatically disconnects (if a connection was is progress) from the network. Press + or - to select a value from 3 to 10min. The lack of exchanges with the network (connecting, sending an e-mail, disconnecting) defines the inactivity time period leading to auto disconnection. Login and Password were up to you when you subscribed to your account. E-mail server access The menus described in this section feature settings needed to connect to the e-mail server of your Internet Service Provider (ISP) via your mobile phone. Most parameters are communicated to you by your service provider and must be entered as given. Press , , select Messages > E-mail > E-mail 1 > Settings and press , . The fields to be completed are the following: POP3 address, SMTP address, Login, Password and E-Mail address. · POP3 address: allows you to enter the IP or DNS address of the POP3 server, which is used to receive e-mails. GSM settings This menu allows you to enter or change the GSM settings *60 6HWWLQJV communicated to you by your operator, which are: Phone number, Auto disconnection, Login and Password. [. . . ] Repaired or replaced Product will be covered by this limited warranty for the balance of the original limited warranty period or ninety (90) days from the date of repair or replacement whichever is longer. Repair or replacement of Product, at Philips' option is your exclusive remedy. What is Not Covered By This Limited Warranty?This limited warranty does not cover:: a) Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation handling, neglect, inundation, fire, water or other liquid intrusion; or What Does This Limited Warranty Cover? [. . . ]