User manual PHILIPS DS3480

[. . . ] The product shall not be exposed to dripping or splashing. Do not place any sources of danger on the product (e. g. liquid filled objects, lighted candles). [. . . ] We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, and old equipment. Trademark notice This product complies with the radio interference requirements of the European Community. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www. philips. com/support. Class II equipment symbol: CLASS II apparatus with double insulation, and no protective earth provided. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPod and iPhone are trademarks of Apple Inc. , registered in the U. S. and other countries. Note •• The type plate is located in the battery compartment. EN 3 English Always bring your product to a professional to remove the built-in battery. 3 Your Docking Speaker What's in the box Check and identify the contents of your package: • Main unit • AC/DC power adapter • Quick start guide Overview a b c d iOS app for the dock With the lightning dock on DS3480, your iPhone/ iPod can work with the following app: • ClockStudioapp (allows you to select sound settings, listen to the Internet radio, set clock and alarm and update firmware) Tip •• You can get the ClockStudio app from the App Store on your iPhone/ iPod. e f g a • Press to switch on or off; Press and hold for 5 seconds to reset Bluetooth • Battery level indicator b DC IN • AC power connector for the supplied AC/DC power adapter c • Power charging connector for an external device d AUDIO IN • Audio input connector for an external audio device e • Bluetooth status indicator f Dock with the Lightning connector for the iPod/iPhone g , • Increase or decrease the volume • Power on/off indicators 4 EN Charge DS3480 DS3480 has a built-in battery that can be charged through the supplied AC/DC power adapter. • Connect DS3480 to AC power through the supplied AC/DC power adapter. • Press to switch on. »» The Bluetooth status indicator flashes. DS3480 starts to pair or reconnect through Bluetooth. • »» During power charging, flashes in green if you have switched on DS3480. is always on in red if you have switched off DS3480. »» When the battery is full, the is always on in green if DS3480 is on; the turns off if DS3480 is off. Tip •• When the battery level is low, flashes in red. •• Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. To switch off, press again. Automatic standby After 15 minutes in idle mode (no play, no button is pressed), the player switches off. EN 5 English 4 Get started Switch on or off 5 Play Play through the lightning dock With the lightning dock on DS3480, you can play from the following iPhone/ iPod: • iPhone 5 • iPod touch (5th generation) • iPod nano (7th generation) Play through Bluetooth Through Bluetooth, you can play on DS3480 from a Bluetooth device, such as an iPad, iPhone, Android phone, or laptop. 1 2 Make sure that you have switched on DS3480. Mount your iPhone/ iPod onto the dock. • The first time you mount your iPhone/ iPod onto DS3480, install the ClockStudio app on your iPhone/iPod as prompted: App store Ignore 3 On your iPhone/ iPod, start music play. Tip •• To remove the iPhone/ iPod, pull it out of the dock. 6 EN Connect through Bluetooth Tip switch off Bluetooth on current Bluetooth device. [. . . ] Connect DS3480 to power. Charge through the USB connector With the USB connector on DS3480, you can charge your mobile phone. 1 2 Use a USB cable to connect DS3480 with the external device. Connect DS3480 to power. 3 Follow onscreen instructions to complete firmware updating. Note •• During the firmware updating, keep the iPhone/ iPod powered on and docked on DS3480. EN 9 English 6 Charge 7 Update the firmware 8 Specifications Amplifier Rated Output Power 2 X 5 W RMS Bluetooth Bluetooth V2. 1+ EDR version Frequency band 2. 402-2. 480 GHzISM Band Rang 10m (free space) General information Power supply - AC Power - Battery Operation Power Consumption Standby Power Consumption Max. load for iPod/iPhone Dimensions -  ain Unit M (W x H x D) Weight - Main Unit Operating temperature and humidity: Storage temperature and humidity: Model: KSASB0241200200HK (Philips) and KSASB0241200200D5 (Philips); Input:  00-240 V ~, 50/60Hz, 1 0. 6A; Output: 12 V 2 A Li-ion battery <18 W <0. 5 W 5V 1A 274 x 143 x 109 mm 1. 2 kg 0°C to 45°C, 5% to 90% Humidity for all climates. [. . . ]