User manual PHILIPS FC8918

[. . . ] νικα 160 Italiano 175 FC8920-FC8910 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Danger -- Never suck up water or any other liquid. Never suck up flammable substances and do not suck up ashes until they are cold. [. . . ] 5 To switch off the appliance, press the on/off button on top of the appliance. 12 English Adjusting suction power 1 During vacuum cleaning, you can adjust the suction power with the selection wheel on top of the appliance. -- Use maximum suction (+) power to vacuum very dirty carpets and hard floors. -- Use minimum suction power (-) to vacuum curtains , tablecloths etc. 2 Specific types only:You can also adjust the suction power with the suction power slide on the handgrip. Storage 1 Switch off the appliance and remove the mains plug from the wall socket. 2 Press the cord rewind button to rewind the mains cord. 3 Specific types only: Always put the Tri-Active nozzle in the carpet setting when you store it. This prevents the side brushes from becoming bent. 4 Put the appliance in upright position. To attach the nozzle to the appliance,  insert the ridge on the nozzle into the storage slot. To ensure stable storage of the telescopic tube, adjust the tube to the shortest length. English Replacing/emptying the dustbag Always unplug the appliance before you replace the disposable dustbag or empty the reusable dustbag. Replacing the disposable dustbag 13 -- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i. Even when the nozzle is not placed on the floor. 2 Lift the dustbag holder out of the appliance. Make sure you hold the dustbag upright when you lift it out of the appliance. 3 Pull at the cardboard tag to remove the full dustbag from the holder . , , When you do this, the dustbag is sealed automatically. 14 English 4 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as far as possible. 5 Put the dustbag holder back into the vacuum cleaner. Note: If no dustbag has been inserted, you cannot close the cover. [. . . ] Let the filter dry at least 2 hours before you put it back into the vacuum cleaner. Note: Make sure that the filter is completely dry before you put it back into the appliance. 5 Put the filter back into the appliance. Note: Make sure that the two lugs of the HEPA filter point downwards. [. . . ]