User manual PHILIPS FR 984

[. . . ] Digital Surround Sound Receiver Audio 984 FR-985 FR-986 FR- 994 FR-995 FR-996 FR- Important notes for users in the U. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Switching the connection • Press CINEMA LINK to switch the connection between the receiver and the TV either on or off. If CINEMA LINK is switched on and the TV menu is active, TV MENU is displayed and the menu and sound functions on the receiver are locked. english Activating CINEMA LINK CINEMA GO on the remote control. € Press y The TV sends a play command to the CINEMA LINK DVD player, if present. The DVD player will start playing and the receiver automatically switches to the best CINEMA LINK sound. € If no DVD player is connected or if the DVD player has no disc loaded, the TV will send a play command to the CINEMA LINK video recorder, if present. Y The video recorder will start playing and the audio receiver selects the best CINEMA LINK sound. € If no video recorder source is connected or tape is loaded, the TV will select the last watched TV channel. 16 SOURCE SELECTION English SOURCE SELECT When selecting a source by turning SOURCE SELECT, the audio and video inputs with the corresponding name are activated. The incoming signal is reproduced by all audio and – if the source includes a video signal – video outputs of the receiver. It is possible to reassign a source selection to other than these standard inputs. The tuner part of the receiver is used, all inputs are switched off. SAT IN audio input and SAT IN video input Using one source selection for two or more appliances You may assign more than one source to a source selection. This can be useful when products are connected one after the other in a chain. Example: A VCR is connected to the TV but only the TV is connected to the receiver. Both SOURCE SELECT settings, TV as well as VCR, have to use the TV input connectors. 1 Choose * SELECT INPUT from the menu and press NEXT 2. 2 Turn SOURCE SELECT to select the source which should be reassigned (e. Y The name of the source is displayed and the light of the source flashes. 3 Turn X MENU NAVIGATOR to select the input connectors which should be used (e. 5 This source selection is now using the chosen audio input (e. VCR uses the TV IN input connectors, VCR <TV IN> is displayed briefly when switching to VCR). [. . . ] €DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the double-D Symbol are trademarks of Dolby Laboratories. Eloped oratorie the d and dev Dolby Lab Designe se from O LOGIC“ and by ity. €DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the double-D Symbol are trademarks of Dolby Laboratories. €DOLBY“, ”DOLBY DIGITAL“, ”PRO LOGIC“ and the double-D Symbol 2 are trademarks of Dolby Laboratories. [. . . ]