User manual PHILIPS FW-C390

[. . . ] Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. The selected disc tray, total number of tracks and the playing time will appear on the display. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. Å All the available discs will play once, then stop. During playback, the selected disc tray, track number and elapsed playing time of the current track are displayed. To play the selected disc only G In CD mode, press DISC 1/2/3 (or CD DIRECT 1/2/3 on the remote control). The selected disc will play once, then stop. The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. You can select and change the various play modes before or during playback. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. during searching , the volume will be reduced. To select a desired track G Press í or ë repeatedly until the desired track is displayed. g If playback is stopped , press É to start Å playback. Note: ­ In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once. Notes: ­ During programme play or shuffling mode, it is not possible to repeat playback the current disc (Repeat Disc mode). Up to 40 tracks can be stored in the memory in any order. G Press Ç once when playback is stopped or twice during playback. pROG disappears and "PROGRAM CLEARED" is displayed. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. The total number of tracks programmed and the total playing time are displayed. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" is displayed instead of the total playing time. [. . . ] Note: ­ All the sound control features (DSC or DBB, for example) are available for selection. Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system. Specifications and external appearance are subject to change without notice. Cleaning the Cabinet G Use a soft cloth slightly moistened with a mild detergent solution. [. . . ]