User manual PHILIPS FW-C505

[. . . ] Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. The disc tray will rotate until the empty tray is ready for loading. A disc is loaded in the disc tray the current selected disc tray is empty the current selected disc tray is loaded or playing The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. All the available discs will playback once, then stop. During playback, the selected disc tray, track number and elapsed playing time of the current track will appear on the display. to playback one disc only G Press the DISC DIRECT PLAY button : DISC 1 , DISC 2 or DISC 3. The selected disc will playback once, then stop. To search for a particular passage during playback G Press and hold à or á and release it when the desired passage is located. during searching , the volume will be reduced. To select a desired track G Press í or ë repeatedly until the desired track appears on the display. g If playback is stopped , press PLAYÉto start playback. Note: ­ In Shuffle mode, pressingí will cause the player to skip only to the beginning of the current track. To skip to the beginning of the current track during playback G Press í once. Up to 40 tracks can be stored in the memory in any order. G To end programming without starting playback, press Ç once . The total number of tracks programmed and the total playing time will appear on the display. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" will appear on the display instead of the total playing time. ­ If you attempt to programme more than 40 tracks, "PROGRAM FULL" will be displayed. ­ If you press any of the DISC DIRECT PLAY buttons, the system will playback the selected disc or track, and the stored programme will be ignored temporarily. ­ During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically. To erase the entire programme G Press Ç once when playback is stopped or twice during playback. [. . . ] Notes: ­ You are advised not to listen to and record from the same source simultaneously. ­ All the navigation sound control features (DSC or VAC for example) are available for selection. Connect the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system. Cleaning the Cabinet ¶ Use a soft cloth slightly moistened with a mild detergent solution. [. . . ]