User manual PHILIPS FWD5D37

[. . . ] which is located on the rear of the cabinet. Retain this information for future reference. _______________________________ Serial No. ________________________________ t s 2 This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] Calibration can take up to 25 seconds. ­ A maximum of 99 tracks can be recorded on a disc. Minimum allowable track length is 4 seconds. AUTOSTART RECORDING This feature enables you to make fast and easy recordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. In analog source material a silence of 2. 7 seconds or more is automatically detected as a track increment. Preparing for autostart recording 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press SOURCE repeatedly to select DIGITAL, OPTICAL or ANALOG mode. TM The DIGITAL I , OPTICAL I or ANALOG flag lights up. TM "DIGITAL 1, OPTICAL or ANALOG" appears on the display. 3 Press REC TYPE once to record a complete disc; or twice to record a single track; or four times to record a complete disc with Auto-Finalize function selected. TM "RECORD DISC, RECORD TRACK or MAKE CD" appears on the display. Recording Important: ­ If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. The track increments are automatically taken over from the digital source material or after 2. 7 seconds silence during analog recording. ON (MANUAL). . . Track numbers can be incremented manually by pressing TRACK INCR(ement) on the remote control. (Minimum track length is 4 sec. ) (This can also be done in Auto mode). · Track numbers cannot be changed after recording. 2 Press REC TYPE three times to enter the Manual Record standby mode. TM The MANUAL flag starts to flash and the display shows "REC MANUAL". 3 Play the source first to set the optimal recording level on the CD recorder. 4 Rotate EASY JOG until all the blue segments are alight on the record/play Level Bar, but the red segments do not light continuously during the loudest passages. TM "-XX DB" appears on the display. Start manual recording 1 To start recording, press RECORD on the CD Recorder and immediately start playback of the selected source (from Stop-mode). TM The track number and recording time appear on the display. [. . . ] "DISC NOT FINALIZED" is displayed. · The CD-RW or CD-R disc is not properly recorder for the use of a standard CD player. TM Read the instruction booklet of your CDRewritable or CD-Recorder on how to finalize a recording. Tape Deck Operation Recording or playback cannot occur or there is a decrease in audio level. · Dirty tape heads, capstans or pressure rollers. [. . . ]