User manual PHILIPS FWI1000

[. . . ] which is located on the rear of the cabinet. Retain this information for future reference. _______________________________ Serial No. ________________________________ 2 t s This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. [. . . ] Select the setting that provides the sound you prefer when listening in your normal listening position. Switching the subwoofer ON · Rotate SUBWOOFER VOLUME clockwise until there is a click. TM The LED indicator lights up in green. Switching the subwoofer to standby mode · Rotate SUBWOOFER VOLUME counter-clockwise until there is a click. TM The LED indicator light turns red. CD DISC CHANGE DISC 1 DISC 2 OPEN·CLOSE DISC 3 Discs for playback This system can play all audio CD, finalized audio CD-Recordable and finalized audio CD-Rewritable format discs. CD Direct Play You can play a CD directly by pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. ­ A lit button indicates that a disc is loaded in the disc tray. SEARCH · TUNING PREV DU (HS B D) REC SOUND NAVIGATION DIGITAL SOUND CONTROL DYNAMIC BASS BOOST Warning!1) This system is designed for conventional CDs. Do not use any accessories such as disc stabilizer rings or CD treatment sheets, etc. , which may damage the CD mechanism. 2) Do not load more than one disc into each tray. 3) When the CD changer is loaded with CDs, do not turn over or shake the system. This may jam the changer. You may load three discs in the CD changer for continuous playback without interruption. 20 v English MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T. A. AM MW FM LW 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz STEREO BACK FRONT HSD C L PRO LOGIC R STANDBY ON CLOCK/ TIMER S S DOLBY B NR RDS Loading the CD Changer 1 Press CD to select CD mode. 3 Press the CD (CD 1·2·3) button to select the disc. 4 Press PREV í or NEXT ë to select the desired track. · Repeat steps 3 to 5 to store other discs and tracks. Notes: ­ If the total playing time is more than "99:59" or if one of the programmed tracks has a number greater than 30, then "--:--" appears in the display instead of the total playing time. ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. · If you press REPEAT during program playback, the current track will be played repeatedly. TM The REPEAT and PROGRAM flags will be displayed. 2 Press STOP·CLEAR Ç to stop program playback. Reviewing the program Reviewing of the program is possible only when playback is stopped. · Press PREV í or NEXT ë repeatedly to review the programmed tracks. · Press STOP·CLEAR Ç to exit review mode. Note: ­ If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM flag also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. Selecting a desired track Selecting a desired track when playback is stopped 1 Press PREV í or NEXT ë until the desired track appears on the display. 2 Press PLAY É to start playback. [. . . ] TM Press STANDBY-ON to switch the system off. Remove the AC power plug from the wall outlet, then reconnect the power plug and switch on the system again. · Speakers are not connected or are connected wrongly. TM Check that the speakers are connected correctly. [. . . ]