User manual PHILIPS FWR33

[. . . ] Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your Philips purchase is registered, you're eligible to receive all the privileges of owning a Philips product. So complete and return the Warranty Registration Card enclosed with your purchase at once, and take advantage of these important benefits. Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty. [. . . ] The number of programmed tracks (STEP), PROG and the total program time are displayed. If the total time of the program is greater than the remaining recording time of the CDR(W): DOES NOT FIT will be displayed briefly, followed by the remaining recording time and RECORD PROG?If you start recording anyway, only those tracks of the program that fit onto the CDR(W) will be recorded entirely. Now you can change the program (see "Programming track numbers", "Erasing a track from the program" and "Clearing the program"). Note: If you try to use a program for recording which contains tracks from the CD changer and CD recorder, 4 DISC PROG and CLEAR PROG?Press either NO to exit or YES to clear the current program and prepare a new one. Note: If you try to store more than 99 tracks, PROGRAM FULL will be displayed. The CD recorder deck offers you 3 main functions: ­ Recording from the internal CD changer and tuner or from a selected external source ­ Finalizing your CDR(W) discs and unfinalizing your CDRW discs ­ Erasing a CDRW disc The recording procedure is the same for CDR and CDRW discs. Make sure the CDR(W) is absolutely free of scratches and dust particles. for recordings , the minimum track length is 4 seconds. You can record up to a maximum of 99 tracks on a disc. the minimum of recording time left on the disc is 7 seconds. Otherwise DISC FULL is displayed and you cannot enter the record mode. Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player, or ­ play a recorded CDRW on a CDRW compatible CD player and CD recorder. Copyright protection The Serial Copy Management System (SCMS) prevents the making of a digital copy from a digital copy. The system allows making a digital recording from the original however, in some countries this may require the authorization of copyright holders. When you try to record copy protected material from an external source, COPY PROTECT will be displayed. no further digital recording is possible then. When you try to record copy protected material from the internal CD changer, no digital recording is possible however, the CD recorder will automatically switch to analog recording. Recording CD text If the original CD has CD text, this text will be recorded automatically, provided that the CD text is not copy protected. Auto level control becomes active when: ­ COMPILE CD is being used, ­ a disc, a track or a track edit is being high speed recorded and the CDR(W) has recordings on it, or ­ a program (consisting of more than one disc) from the CD changer is being high speed recorded. Auto level control will not become active when: ­ using COPY CD, ­ making recordings from the FM tuner, ­ making recordings from an external source, or ­ making normal recordings in listen mode. [. . . ] Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair. When the product has been repaired, you must pick up the unit at the center. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you. [. . . ]