User manual PHILIPS FWR7

[. . . ] Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your Philips purchase is registered, you're eligible to receive all the privileges of owning a Philips product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. [. . . ] The record level is reset after the unit has been switched to standby. For internal recordings you can record from the internal CD changer or tuner. You can choose from the following recording modes: ­ High speed recording and automatic finalizing: Fast and easy!Record and finalize your CDR(W) in one quick step while the sound is muted. You can record the current CD or a program from the CD changer. ­ High speed recording: Record your CDR(W) fast while the sound is muted. You can record an entire CD, a track, a program or a track edit from the CD changer. ­ Normal recording and listening: Listen to the recording while you are making it. You can record an entire CD, a track, a program or a track edit from the CD changer. ­ Manual recording: Start and stop your recording manually while listening to it. You can do radio recordings from the FM tuner. High speed recording and automatic finalizing (optional) of the current program 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Press COMPILE CD on the unit to enter the record mode. Now you can change the program (see "Program") and return to the record mode by pressing COMPILE CD. Press either: YES, if the CDR(W) is to be finalized after recording, or NO, if the CDR(W) is not to be finalized after recording. Arrow lights, RECORDING IN PROGRESS is shown, high speed recording and finalizing (if selected) start and the actual recording time remaining starts to count down. Note: If no program is available and you press COMPILE CD, you enter immediately into the program menu. Start your programming and return to the record mode by pressing PROGRAM or COMPILE CD. High speed recording and automatic finalizing of the current disc 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. 2 Press CDTMCD on the unit to enter the recording mode. YThe arrow lights, RECORDING IN PROGRESS is shown, high speed recording and finalizing start, and the actual recording time remaining starts to count down. Note: If a program was already available before pressing CDTMCD, this will be ignored. [. . . ] All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the product expires, the warranty on all replaced and repaired parts also expires. Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair. When the product has been repaired, you must pick up the unit at the center. [. . . ]