User manual PHILIPS G390

[. . . ] Do not place in or drop into water or other liquid. Always unplug this Groomer from the electrical outlet immediately after using, except when Groomer is (re)charging. When discarding Groomer, unplug Groomer to remove rechargeable battery. See Battery Removal Instructions. WARNINGburns, fire, electric To reduce the risk of shock or injury to persons: 1. [. . . ] 2 Remove the AccuControl comb attachment by pressing and sliding the Hair Length Selector upwards (fig. Never pull off the AccuControl comb attachment by grasping the flexible top portion. Always pull off by the bottom part of attachment. 4 Make well-controlled movements. Touch the hair/skin lightly with the Groomer. Defining Beard, Moustache and Sideburns 1 Be certain the Groomer is in the OFF position. 2 Remove the AccuControl comb attachment by pressing and sliding the Hair Length Selector upwards (fig. 3 Detach the full width trimmer attachment by pushing the release button (fig. 4 Put the precision trimmer attachment on the Groomer (fig. You will hear a click. Hold the Groomer upright when you use the precision trimmer attachment (fig. 12). Using Nose, Ear & Eyebrow Trimmer Attachment 1 Be certain the Groomer is in the OFF position. 2 To attach or remove nose, ear, eyebrow trimmer (or change attachments): Remove the AccuControl comb attachment Remove the full width trimmer attachment by Put the nose, ear, eyebrow attachment on the (fig. 9). pushing the release button (fig. 13). You will hear a click. Trimming Nose Hair Make sure nasal passages are clean. 1 Place nose, ear and eyebrow attachment on Groomer. Do not press too hard. Hair Clipping Make sure that the appliance is fully charged before you start clipping hair. The appliance will not operate while cord is connected to electrical outlet. Before you start clipping, make sure that the head of the person whose hair you are cutting is at the same level as your chest so that all parts of his/her head are clearly visible and within easy reach. Before you begin, comb the hair in the direction of growth. To achieve optimal clipping results, always move the appliance slowly through the hair against the direction of hair growth. Clipping with hair comb attachment 1 Put the hair clipper comb on the full width trimmer attachment and push until you hear it `click' into place (fig. 2 Press the Hair Length Selector and slide it to the desired setting. See Table 2. 3 The setting selected will appear in the window to the left of the Hair Length Selector (fig. When you are clipping for the first time, start at the maximum clipping length setting (#9) to familiarize yourself with the appliance and prevent accidentally trimming hairs too short. As you become familiar with the settings, adjust the Hair Length Selector to desired trimming length. Selector will `click' into position at each setting. Table 2. [. . . ] Battery should only be removed when Groomer is to be discarded. All servicing or battery replacement should be performed by the Philips Norelco Service Location. For assistance, call toll free: 1-800-243-3050 or visit our website: www. philips. com/norelco. 1 Unplug electrical cord from outlet and Groomer before dismantling Groomer. [. . . ]