User manual PHILIPS GC 3541

[. . . ] Drip stop (specific types only) This iron is equipped with a drip-stop function: the iron automatically stops producing steam when the temperature is too low, to prevent water from dripping out of the soleplate. Automatic shut-off function (specific types only) The automatic shut-off function automatically switches off the iron if it has not been moved for a while. Note: If the amber temperature light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. Double-Active Calc System (specific types only) The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with the CalcClean function. [. . . ] The soleplate of the iron can become extremely hot and may cause burns if touched. When you have finished ironing, when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to position 0, put the iron on its heel and remove the mains plug from the wall socket. Always place and use the iron on a stable, level and horizontal surface. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. This appliance is intended for household use only. The temperature light goes on from time to time during ironing. Using the appliance Note:The iron may give off some smoke when you use it for the first time. 7) - 1 - 2 for moderate steam (temperature settings 2 to 3) - 3 - 4 for maximum steam (temperature settings 3 to MAX) Note:The iron starts to produce steam as soon as it has reached the set temperature. Note: If the selected ironing temperature is too low (MIN to 2), water may drip from the soleplate (see chapter `Features', section `Drip stop'). Features Spray function You can use the spray function at any temperature to moisten the article to be ironed. Steam boost A powerful steam boost helps to remove very stubborn creases. This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. 1) A Spray nozzle B Filling opening with cap C Steam boost button ( 9) D Spray button ( 8) E Steam control F Amber temperature light (specific types only: with red auto-off indication) G Calc-Clean button H Temperature dial I Mains cord J Heel K Anti-Calc tablet (specific types only) L Water tank Not shown: filling cup Before first use 1 Removeanysticker, protectivefoilorplasticfrom thesoleplate(Fig. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. Problem Water droplets drip onto the fabric during ironing. You have put an additive in the water tank. You have not closed the cap of the filling opening properly. Put the iron on its heel and wait until the amber temperature light goes out. [. . . ] Guarantee & service If you need service or information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. [. . . ]