User manual PHILIPS GC4521/20

[. . . ] 3 Close the water filling door ( ‘click’). 7 Temperature and steam setting Table 1: Warning: Do not use steam or steam boost at low temperature, as indicated in the below table. Otherwise, hot water may leak from the iron. [. . . ] 1 put the iron on a levelled surface and push up the Quick Calc Release lock at the back of the iron. 2 Take out the Quick Calc Release tray. 3 Pour out scales in the tray into a sink or dustbin. 10 English Do not pour water, vinegar, descaling agents or other chemicals into the iron from the opening of the Quick Calc Release. Do not use vinegar, descaling agents or other chemicals to wash the tray. 4 Wipe off the scales in the opening of the Quick Calc Release tray with a damp cloth. 6 Push down the Quick Calc Release lock. Do not use the iron when the Quick Calc Release tray is not locked. If you break or lose the tray, contact a consumer care center in your country (see the worldwide guarantee leaflet for contact details). Calc-clean function IMPORTANT: Besides Quick Calc Release function, you should also perform calc-clean once every 1 month to prolong the life of your iron. If water in your area is very hard, or you see scales coming out from the soleplate during ironing, use this function more frequently. 1 Make sure the iron is unplugged and the steam slider is set to dry setting. 2 Fill the water tank to the MAX indication. Do not pour vinegar or other descaling agents into the water tank. 3 Plug in the iron and set the temperature dial to MAX. 4 Unplug the iron when the temperature light goes out. Keep pushing the calc clean button and gently shake the iron forth and back until all water in the water tank has been used up. Scales is flushed out, steam and boiling water also come out of the soleplate. [. . . ] use the Calc-clean funtion (see chaper ‘Cleaning and maintenance’ , section ‘Calc-clean function’). Do not fill the water tank beyond the MAX indication. Pour excess water out of the water tank. [. . . ]