User manual PHILIPS GC 7520

[. . . ] Do not use any other cap on the steam tank than the Calc-Clean rinsing cap that has been supplied with the appliance, as this cap also functions as a safety valve. Always place and use the iron and the steam tank on a stable, level and horizontal surface. The iron platform and the soleplate of the iron can become extremely hot and may cause burns if touched. If you want to move the steam tank, do not touch the platform. [. . . ] This appliance is intended for household use only. If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. preparing for use Filling the water tank Never immerse the steam tank in water. Do not put hot water, perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. GC7430: Fill the water tank when the `water tank empty' light flashes. gC7420: Fill the water tank when the water in the water tank has reached the MIN level. You can refill the water tank at any time during ironing. 2) 2 Fill the water tank with tap water up to the maximum level (Fig. If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled water. 3 Properly close the filling funnel lid (`click'). Do not tilt or shake the steam tank when the water tank is full. 2 Remove the mains plug from the wall socket. 3 Put the iron on the iron platform and let the appliance cool down before you start to clean it. features vertical steam ironing Never direct the steam at people. 1 To steam iron hanging curtains and clothes (jackets, suits, coats), hold the iron in vertical position (Fig. During steam ironing, you can use the steam boost function to remove stubborn creases. Note: Some water droplets may appear when you use the steam boost function for the first time. The water droplets disappear after you have used the steam boost function for some time. `Water tank empty' light (GC7430 only) When the water in the water tank runs low during use, the `water tank empty' light goes on (Fig. Cleaning and maintenance Never immerse the iron and the steam tank in water or any other liquid, nor rinse them under the tap. Let the iron and the steam tank cool down sufficiently before you clean them. 1 Clean the iron and the steam tank with a damp cloth. [. . . ] Rinsing the steam tank Let the appliance cool down sufficiently before you remove the Calc-Clean rinsing cap. Rinse the steam tank once a month or after you have refilled the water tank 10 times. 6 Pour fresh water through the Calc-Clean hole with the filling cup. 10 Firmly screw the Calc-Clean rinsing cap clockwise onto the steam tank. [. . . ]