User manual PHILIPS GC8619/30

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS GC8619/30. We hope that this PHILIPS GC8619/30 user guide will be useful to you.

Lastmanuals help download the user guide PHILIPS GC8619/30.


Mode d'emploi PHILIPS GC8619/30
Download
Manual abstract: user guide PHILIPS GC8619/30

Detailed instructions for use are in the User's Guide.

[. . . ] Note: For the shortest ironing time, we advise you to use the ‘OptimalTemp’ mode. 1 Press the ECO button when the appliance is switched on (Fig. 2 To go back to the ‘OptimalTemp’ mode, press the ECO button again. To reactivate the steam generator, press the on/off button. [. . . ] This helps to prolong the lifetime of the appliance and optimise the ironing performance. If your water is very hard, increase the descaling frequency. To avoid any risk of burns, make sure the appliance has been unplugged for at least 2 hours and has completely cooled. Tip:When you perform the descaling procedure, place the appliance on the edge of the table top or near the sink. Water may flow out of the appliance when the EASY DE-CALC knob is opened. 1 Hold a cup under the EASY DE-CALC knob and turn the knob anti-clockwise. €5) 2 Remove the EASY DE-CALC knob and let the water with scale particles flow into the cup (Fig. 3 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and tighten it. €7) Descaling the soleplate If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate due to scale particles. Descale the soleplate by following the procedure below. Never use chemical or additives with the appliance. If you have already done so, follow the procedure in chapter ‘IMPORTANTcleaning and maintenance’, section ‘Descaling the soleplate’ to remove the chemicals. The appliance has not heated Wait until the iron ready light stays on up sufficiently. There is not enough water in Fill the water tank up to the MAX indication. Steam condenses into water in the hose when you use steam for the first time or have not used it for a long time. Steam has condensed on the ironing board cover after a long ironing session, or your board cover is not designed to cope with the high steam rate. The EASY DE-CALC knob is not tightened properly. The rubber sealing ring of the EASY DE-CALC knob is worn. Hold the iron away from the garment and press the steam trigger. Wait until steam instead of water comes out of the soleplate. [. . . ] Replace the ironing board cover if the foam material has worn out. We also advise you to use a layer of felt material in the board cover to prevent water droplets. The ironing board cover becomes wet, or there are water droplets on the floor/garment. Switch off the appliance and wait 2 hours for it to cool down. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC8619/30

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC8619/30 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag