User manual PHILIPS HD3134/00

[. . . ] Always there to help you Register your product and get support at www. Com/welcome User manual Safety leaflet Warranty Recipe 5 l m n Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N. 0_130520 s r q p 8 o English 1 Your multi-cooker Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. [. . . ] 12 The multi-cooker will be in standby mode automatically. Controls overview l Keep-warm button m Display n Menu button o Cooking time button p Preset button q Temperature button r Cooking functions s Start/Off button •• adjust the water level for different types of rice and your own preference. Make sure that the outside of the inner pot is clean and dry, and that there is no foreign residue on the heating element or the magnetic switch. 3) 1 Follow the steps in “Preparations before cooking”. 2 Press the menu button (МЕНЮ) until the rice cooking function (Рис) is selected. »» The default cooking time starts flashing on the display. 3 Press the start button (СТАРТ/ВЫКЛ) to start cooking. 4 When the cooking is finished, you will hear a few beeps and the selected cooking function light will be off. Functions overview Functions Rice (рис) Congee (каша) Fry (жарить) Stew (тушить) Bake (печь) Yogurt (йогурт) Default Adjustable cooking time cooking time 30 - 40 Minutes 10 Minutes 15 Minutes 1 hour 45 Minutes 8 hours / 5 minutes - 2 hours 5 - 60 minutes 20 minutes - 10 hours 20 - 120 minutes 6 - 12 hours Preset time 1 - 24 Hours 1 - 24 Hours / 1 - 24 Hours 1 - 24 hours 1 - 24 hours Note •• When removing the inner pot from the multi-cooker, use a kitchen glove •• After the cooking has started, you can press the start/off button (СТАРТ/ •• •• or a cloth, as the inner pot will be very hot. ВЫКЛ) to deactivate the cooking process, and the multi-cooker will be in standby mode. You can select the cooking time from 20 minutes to 2 hours. the default cooking temperature is 100°C. You can select the temperature between 40°C to 160°C. Note •• Do not exceed the volume indicated nor exceed the maximum water •• •• level indicated in the inner pot, as this may cause the multi-cooker to overflow. After the cooking has started, you can press the start/off button (СТАРТ/ ВЫКЛ) to deactivate the cooking process, and the multi-cooker will be in standby mode. You can select the cooking time between 20 minutes to 10 hours. Note •• In standby mode, you can press the keep-warm button (ПОДОГРЕВ) to •• In keep-warm mode, you can press the keep-warm button (ПОДОГРЕВ) to enter standby mode. 9) You can preset the delayed cooking time for different cooking modes. »» The default preset time starts flashing on the display. 4 Press the preset button (ОТСРОЧКА) repeatedly to select the desired preset time. 5 After the preset time is set, press the start button (СТАРТ/ ВЫКЛ) to start cooking. 6 The cooking process will be finished when the preset time has elapsed. [. . . ] Check if the power cord is connected to the multi-cooker properly and if the plug is inserted firmly into the power outlet. Take the appliance to your Philips dealer or a service center authorized by Philips. The multi-cooker is not connected to the power supply. If there is no power supply, the power failure backup function does not work and the display does not function. [. . . ]