User manual PHILIPS HD7854/60

[. . . ] HD7854 User manual 1 ENGLISH 6 DANSK 30 DEUTSCH 54 FRANÇAIS 81 MAGYAR 107 NEDERLANDS 132 NORSK 159 SVENSKA 184 HD7854 6 ENGLISH Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Make your coffee moments truly special with SENSEO®. This unique system combines the easy-to-use Philips SENSEO® coffee machine with the specially developed Douwe Egberts SENSEO® coffee pods, giving you a full, smooth coffee with a delicious foam layer. [. . . ] 6 Hold the cup tray in your hand while you clean it with hot water. If necessary, use some washing-up liquid. The cup tray can also be cleaned in the dishwasher. To clean the cup tray, always remove it from the machine. It may prove sharp when handled incorrectly. 7 Clean the pod holders in hot water, if necessary with some washingup liquid, or in the dishwasher. If the sieve in the centre of the pod holder is clogged, rinse the pod holder under a running tap. ENGLISH 8 Clean the water reservoir in hot water, if necessary with some washing-up liquid. Note: If you use a washing-up brush, be careful not to damage the valve and float in the bottom of the water reservoir. Note:The water reservoir can also be cleaned in the dishwasher. 21 9 Clean the water inlet on the machine with a moist cloth. Do not use an object with sharp edges to clean the water inlet. 10 Rinse the parts with fresh water after cleaning and put them back into the machine. 11 Clean the water distribution disc with a moist cloth. If it does, the coffee machine starts leaking. Note: Be careful not to damage the metal tab on the water distribution disc. Flush the machine in the following way: 1 Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. 2 Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pod or pods. 22 ENGLISH 3 Close the lid and lock the lid lever. 5 litres) under the coffee spout to collect the water. , , The light rings around the 1-cup button  q and the 2-cup button qq light up continuously. 6 To start flushing, press the 1-cup button q and the 2-cup button qq briefly at the same time. [. . . ] To restart the descaling procedure: 1) Remove the Calc-Clean tool 2) Flush the machine by pressing the 1-cup button qand the 2-cup button qq briefly at the same time 3) Reinsert the Calc-Clean tool and press the CLEAN/ CALC CLEAN button to start the descaling procedure. The light ring around the on/off button continues to flash rapidly. When the light ring around the on/off button flashes, there is not enough water in the water reservoir to brew coffee. To brew coffee, the water in the water reservoir must be above the MIN level. [. . . ]