User manual PHILIPS HD8760/01 QUICK STARTING GUIDE

[. . . ] € Remove the mains plug from the wall socket: - If a malfunction occurs. - If the machine will not be used for a long time. Pull on the plug, not on the power cord. Do not touch the mains plug with wet hands. [. . . ] - Appliance: unplug the appliance and cut the power cord. - Deliver the appliance and power cord to a service centre or public waste disposal facility. 151 “Implementation of the directives 2005/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment, as well as waste disposal”. This product complies with EU Directive 2002/96/EC. Lift the water tank using the Rinse and fill the water tank handle. Remove the coffee bean hop- Slowly pour the coffee beans per lid. Insert the plug on the other Switch the power button Press the button to turn on the machine. End of the power cord into a to “I”. IT EN Place a container under the The machine primes the water circuit. EN and and lights flash simultaneously; the machine The warms up. Com/support Instructions 11 Istruzioni English When the and is ready for use. Com/support MY FAVORITE ESPRESSO IL MIO ESPRESSO IDEALE OK Press and hold the button until it starts to flash quickly. The Note: To programme coffee, press and hold the ly during programming. EN button flashes quick- Wait until the desired quantity of coffee is reached. Note: to stop programming for coffee, press the button. Com/support Instructions 13 Istruzioni English Italiano ADJUSTING THE COFFEE GRINDER REGOLAZIONE MACINACAFFÈ The grinder adjustment knob inside the coffee bean hopper MUST only be turned when the coffee grinder is working. If coffee is watery, change the grinder setting. When the CALC CLEAN button lights up steadily, you need to descale the machine. Not doing this will ultimately make your appliance stop working properly. In this case repair is not covered under your warranty. EN IT The descaling cycle “ the cycle, press the “ short time. EN ” (A) and the rinse cycle “ ” (B) may be paused by pressing the “ ” button. [. . . ] Com/support IT Slowly flashing Insert the brew group properly. Steady on You need to descale the machine. See descaling chapter for further guidance. EN IT EN All lights flashing simultaneously Turn off the machine. [. . . ]