User manual PHILIPS HD8762/01 QUICK STARTING GUIDE

[. . . ] COM/SUPPORT Register your product and get support at www. Com/welcome Português Español Français Quick Instruction Guide Type HD8762 Deutsch Italiano English updates on how to take care of your machine. This booklet contains quick instructions on how to operate your machine properly. This machine is equipped with safety features. [. . . ] Com/support Instructions 13 Istruzioni English Italiano ADJUSTING THE CERAMIC COFFEE GRINDER REGOLAZIONE MACINACAFFÈ IN CERAMICA The grinder adjustment knob, inside the coffee bean hopper, MUST only be turned when the ceramic coffee grinder is working. Select ( ) for coarse grind - Select ( ) for fine grind - Brew 2-3 products to taste the lighter taste. If coffee is watery, change the grinder setting. Dispensing may be preceded by small jets of hot water. Insert the suction tube into the Automatic Milk Frother as shown in the figure. inserire il tubo di aspirazione nel Montalatte Automatico come indicato in figura. Insert the Automatic Milk Insert the suction tube in the milk container. EN Place a cup under the Auto- Press the button to start dispensing steam. When the milk froth has the desired consistency, press button to stop dispensing steam and remove the container. Dispensing may be preceded by small jets of hot water. Place a container underneath the steam wand, from which the Automatic Milk Frother has been removed. utilizzare solo la specifica impugnatura protettiva. EN Press the button to start To stop the hot water dispensing press the Remove the container. When the “CALC CLEAN” symbol is displayed, you need to descale the machine. Not doing this will ultimately make your appliance stop working properly. In this case repair is not covered under your warranty. EN IT EN IT The descaling cycle (A) and the rinse cycle (B) may be paused by pressing the button. To resume the cycle, press the button again. This allows the container to be emptied or the machine to be left unattended for a short time. Com/support Instructions 15 Istruzioni English 1 2 3 Empty the drip tray and the Remove the Automatic Milk Frother from Press the button. Remove the “INTENZA+” water filter from the water tank if it was installed and replace it with the small white original one. IT CALC CLEAN Pour the entire descaling Then fill the water tank with Place a large container (1. [. . . ] Insert the suction tube in the Empty the container and container. Place it back under the Automatic Milk Frother. Com/support Instructions 19 Istruzioni English Press the button to dis- When the water has been completely dispensed, press the Empty the container. Remove the Automatic Milk Frother from the machine. [. . . ]