User manual PHILIPS HD9385/20

[. . . ] 2 english Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. €¯1) 1 Lid 2 Spout 3 Water level indicator 4 Lid release button 5 Base 6 Base connector 7 Cord storage facility 8 Mains plug 9 Black/Fruit/Herbal tea button 10 Instant soup/Hot chocolate button 11 Instant coffee button 12 Green tea button 13 40ºC button 14 KEEP WARM button -------- Important Read this user manual carefully before you use the appliance and save it for future reference. Danger -- Do not immerse the kettle or the base in water or any other liquid. [. . . ] Heating up water with preset buttons Different hot drinks require different temperatures to taste their best. With the preset buttons on the base, you can choose the right temperature for your favourite hot drink. To make sure the appliance accurately* heats up the water to the set temperature, fill the kettle with at least 0. However, the actual temperature of the water may deviate slightly from the indicated temperature. -- There are 4 buttons that represent different hot drinks: black/fruit/ herbal tea (100ºC), instant soup/hot chocolate (95ºC), instant coffee (90ºC) and green tea (80ºC). , , The water starts heating to the temperature of the selected preset button. , , While the water is heated, the light ring around the selected button slowly pulsates until the water has reached the desired temperature (Fig. , , If the current temperature of the water in the kettle is higher than the temperature of the selected preset button, the light ring does not pulsate, but flashes 3 times to indicate that this button cannot be operated (Fig. Cleaning and descaling Always unplug the base before you clean it Always remove the kettle from the base before you clean the kettle. Never immerse the kettle or its base in water. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Cleaning the kettle and the base 1 Clean the outside of the kettle and the base with a soft cloth moistened with warm water and some mild cleaning agent. Caution: Do not let the moist cloth come into contact with the cord, the plug and the connector of the base. Cleaning the filter Scale is not harmful to your health but it may give your drink a powdery taste. The anti-scale filter prevents scale particles from ending up in your drink. Clean the single-action filter regularly in the following way: 1 Take the filter out of the kettle (Fig. 2 Gently clean the filter with a soft nylon brush. 3 Slide the filter back into the kettle. Note:You can deactivate the appliance by pressing the button again or by removing the kettle from the base. , , When the water has reached the set temperature, you hear an audible signal. The light ring around the selected button stops pulsating and lights up continuously (Fig. Note:You can select a different type of hot drink by pressing a different preset button while the kettle is operating. [. . . ] By doing this, you help to preserve the environment (Fig. Guarantee and service If you need service or information or if you have a problem, please visit the Philips website at www. Com/support or contact the Philips Consumer Care Centre in your country. You find its phone number in the worldwide guarantee leaflet. [. . . ]