User manual PHILIPS HF3465

[. . . ] Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. The Philips Wake-up Light helps you wake up more pleasantly. The light intensity of the lamp gradually increases to the set level in the 30 minutes before the set wake-up time. [. . . ] Note:The light intensity you have selected is automatically set as the light intensity level for the alarm as well. Tip:When you use the appliance for the first time, set the light intensity to 20. The moment you wake up, check which light intensity level the appliance has reached by briefly pressing the light intensity + or button. When you do this, the current alarm light intensity level appears on the display. Set the alarm light intensity to this level for the next day. 3 To switch off the lamp , press the lamp on/off button again. Setting the alarm When you set the alarm, you choose an alarm time and (only in case of HF3470) the type of sound you want to wake up to. the alarm is set when the alarm symbol is visible on the display. The light intensity slowly increases to the selected level during the last 30 minutes before the set alarm time. The sound slowly increases in 90 seconds to the selected level after the set alarm time. Note:You can set the light intensity by pressing the light on/off button and then pressing the light intensity + or - button and you can set the alarm volume by pressing the volume increase or decrease button. If you do not want to wake up to the lamp or to a sound, set the light intensity or volume level to OFF. see sections `Using the lamp' and `Radio/volume' in this chapter. 1 Push the control lever down to the middle position to switch on the alarm. If the alarm time is correct, just wait a few seconds. Note:You can only do this when the hour indication flashes. If this is not the case, push the control lever up and down again to enter the alarm time mode. 9) 5 Press the SELECT button to confirm or wait for a few seconds (Fig. , The appliance leaves the menu and the display shows the clock time. Switching off the alarm To switch off the alarm function, push up the control lever to the top position. note:The lamp stays on to light your room. You can switch off the lamp by pressing the light on/off button. [. . . ] Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. [. . . ]