User manual PHILIPS HP6403/30

[. . . ] Your skin may become a little red and irritated the first few times you use the epilator. This phenomenon is absolutely normal and quickly disappears. As you use the appliance more often, your skin gets used to epilation, skin irritation decreases and regrowth becomes thinner and softer. If the irritation has not disappeared within three days, we advise you to consult a doctor. [. . . ] Make sure the surface of the comb always stays in contact with the skin (Fig. To style your bikini line, use the trimming head without the comb. Styling without the comb results in a hair length of approx. You can be as creative as you like when you style your bikini line. Note:The trimming head can only be used at speed setting I. 1 Push the epilating head in the direction of the arrows on the back of the appliance (1) and remove it from the appliance (2) (Fig. 2 Put the trimming head on the appliance (1) and push it against the direction of the arrows on the back of the appliance (2) to fix it (Fig. Note: Speed II does not work when the trimming head is attached. 4 Move the appliance towards the desired contour of your bikini line, against the direction of hair growth. Touch the skin lightly with the trimming head (Fig. Cleaning and maintenance Note: Make sure the appliance is switched off and unplugged before you start to clean it. Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. --Never rinse the appliance or the adapter under the tap (Fig. Keep the appliance and the adapter dry (Fig. Cleaning the attachments 1 Remove any attachment from the epilating head (Fig. -- Remove the trimming comb by pulling it off the trimming head (Fig. 2 Remove loose hairs from the attachment with the cleaning brush. 3 Rinse the attachment under the tap while turning it. 4 Dry the attachment before you use or store it. Cleaning the epilating head/trimming head 1 Push the epilating head/trimming head in the direction of the arrows on the back of the appliance (1) and remove it (2) (Fig. 2 Remove loose hairs with the cleaning brush (Fig. 3 Rinse the epilating head/trimming head under the tap while turning it (Fig. [. . . ] Then place the epilator on the skin at an angle of 90° with the on/off slide pointing in the direction in which you are going to move the appliance (Fig. 4 Move the appliance slowly over the skin, against the direction of hair growth. Press the appliance lightly onto the skin. Epilating the underarms and bikini line Your epilator comes with a sensitive area cap that reduces the number of active epilating discs. [. . . ]