User manual PHILIPS HR-1822

[. . . ] If you detect cracks in the filter or if the filter is damaged in any way, do not use the appliance anymore and contact the nearest Philips service centre. Never reach into the feeding tube with your fingers or an object while the appliance is running. Do not touch the blades when you clean them. [. . . ] When you prepare apple juice, remember that the thickness of the apple juice depends on the apple you are using. the juicier the apple the thinner the juice. Choose an apple that produces the type of juice you prefer. You can slow down this process by adding a few drops of lemon juice. fruits that contain starch , such as bananas , papayas , avocados , figs and mangoes are not suitable for processing in the juice extractor. Use a food processor, blender or bar blender to process these fruits. Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the juice will lose its taste and nutritional value. 9) This appliance only functions if all parts have been properly mounted and the lid has been properly locked in place with the latches. 3 Put the pre-cut pieces of ingredients into the feed tube and gently press them towards the rotating sieve with the pusher (Fig. Do not exert too much pressure on the pusher; this could affect the quality of the end result and it could even cause the sieve to come to a halt. neverinsertyourfingersoranobjectintothefeedtube. 4 Afteryouhaveprocessedallingredientsandtheflowofjuiceintothejuicecuporglasshas stopped, switch off the appliance and wait until the sieve has stopped rotating. Do not let the appliance run for more than two minutes without interruption. If you have not finishedextractingjuice, switchofftheapplianceandallowittocooldownfortwominutes before you continue. 5 HR1823 only: The integrated foam separator in the juice cup lid enables you to pour a nice cup of fresh juice without a layer of foam on top (Fig. Do not clean any of the parts in a dishwasher. The appliance is easier to clean if you do so immediately after use. [. . . ] Switch off the appliance, clean the feed tube and process a smaller quantity. The ribs in the bottom of the sieve should fit properly onto the driving shaft. Cracks, crazes, a loose grating disc or any other irregularity may cause malfunction. [. . . ]