User manual PHILIPS HR-2160

[. . . ] Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. The appliance is equipped with a built-in safety system that prevents the appliance from functioning if the accessories have been assembled incorrectly or have not been assembled at all. 1) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Motor unit with control knob Pulse setting Speed settings Ice button Plastic blender blade unit Plastic blender jar (HR2168/HR2167/HR2161/HR2160) Level indication Lid of plastic blender jar Opening in lid Measuring cup Filter (HR2168/HR2167 only) Glass blender blade unit Glass blender jar (HR2170 only) Level indication Lid of glass blender jar Opening in lid Measuring cup Coupling unit Chopper bowl (HR2168 only) Chopper blade unit Chopper lid Mill blade unit Mill beaker (HR2168/HR2167/HR2161 only) important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] - To process ingredients at a particular speed, turn the control knob to the required speed setting. Do not let the appliance run for more than 2 minutes at a time. Let the appliance cool down to room temperature before you continue processing. To process ingredients very briefly, turn the control knob to the pulse setting (P) several times. 3 When you have finished processing, set the control knob to 0 and unplug the appliance. Always set the control knob to 0 before your open the lid. Tips To prevent spillage, do not put more than 1. 5 litres of liquid in the blender jar, especially when you process at a high speed. Do not put more than 1 litre in the blender jar when you process hot liquids or ingredients that tend to foam. You can use the opening in the lid to add ingredients while the appliance is running (Fig. Never use the pulse setting longer than a few seconds at a time. Do not process dry ingredients for more than 1 minute. Cut solid ingredients into smaller pieces before you put them in the blender jar. Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a series of small batches instead. If you are not satisfied with the results when you blend solid ingredients, use the pulse setting a few times to let the blender run briefly. If you want to use a spatula, switch off the appliance, open the lid and then stir the ingredients. You can also remove some of the contents of the jar and process smaller amounts. HR2170 only: The jar is made of glass and therefore breakable. If the jar is very cold, rinse it well with lukewarm water before you pour hot liquid into it. if the glass jar cracks , stop using it. Filter (HR2168/HR2167 only) You can use the filter to obtain extra finely blended sauces, fresh fruit juices or cocktails. [. . . ] Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before you process the next batch of ingredients. Chilli paste ingredients 20g fresh red chillies 30g shallots 2 cloves garlic 1 Cut the chillies and shallots into large pieces that fit into the chopper bowl. Note: If you want to prepare a larger quantity, let the appliance cool down to room temperature before you process the next batch of ingredients. Frequently asked questions If the appliance does not work or does not work properly, first check the list below or visit the Philips website at www. [. . . ]