User manual PHILIPS HR1619/90

[. . . ] Register your product and get support at www. νικα 25 Español 32 Suomi 39 Français 45 Italiano 52 Nederlands 59 Norsk 66 Português 72 Svenska 79 Türkçe 85 97 103 HR1619 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Danger -- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap. [. . . ] ~ 45-60sec Speed 12-16 1 Turbo Turbo Turbo Turbo English 5 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to fix it (‘click’) (Fig. 6 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8 Press the on/off button or the turbo speed button to switch on the appliance. -- When you use the on/off button, you can adjust the speed with the speed selector. The higher the speed, the shorter the processing time required. -- When you use the turbo speed button, the appliance operates at maximum speed. In this case, you cannot adjust the speed with the speed selector. Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and loosen the ingredients with a spatula or add some liquid. Note: Always let the appliance cool down after chopping meat with the blade unit. 9 After processing, release the on/off button or the turbo speed button to switch off the appliance. Then wait until the blade unit has stopped rotating. 10 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it (2). If you use the turbo speed button, use it briefly to prevent the food from becoming too finely chopped. -- Do not let the appliance operate too long when you chop (hard) cheese or chocolate. €Otherwise these ingredients become too hot,  start to melt and turn lumpy. -- Do not use the blade unit to chop very hard ingredients like coffee beans, turmeric, nutmeg and ice cubes, as this may cause the blade unit to get blunt. You can switch from slicing to shredding and the other way round by simply turning the disc. Never process hard ingredients like ice cubes with the combination disc. The cutting edges of the combination disc are very sharp. 1 Place the tool holder in the bowl (Fig. 2 Place the combination disc on the tool holder with the slicing or shredding side facing up, depending on the result you want (Fig. [. . . ] 4 See the separate cleaning table for further instructions. English 11 Storage 1 Put the protective covers on the blender bar and the blade unit. 2 Put the blade unit and the combination disc on the tool holder and store them in the bowl. Environment -- Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. [. . . ]