User manual PHILIPS HR2011

[. . . ] If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades. Never place the blade unit onto the motor unit if the blender jar or mill beaker (specific types only) is not or not properly attached to it. Caution Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. [. . . ] If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Built-in safety lock This feature ensures that you can only switch on the appliance if you have properly assembled the blender jar or mill beaker on the motor unit. A Motor unit B Control knob with pulse setting and speed settings Blender blade unit Sealing ring Level indication Glass blender jar Lid of glass blender jar Opening in lid Measuring cup Getting started Thoroughly clean the parts that come into contact with food before you use the appliance for the first time (see chapter `Cleaning'). using the appliance Blender The blender is intended for fine pureeing , chopping and blending. With the blender you can prepare soups, sauces and milk shakes. You can also use it to process vegetables, fruit, meat, pancake batter etc. Preparing the blender for use 1 Assemble the sealing ring on the blender blade unit (Fig. ) The blender jar can be mounted in two positions: with the handle on the right side or on the left side. HR2011/HR2010: Place the lid on the blender jar, push it down and turn the lid clockwise (`click'). Insert the measuring cup into the opening in the lid. Turn the control knob to the pulse setting if you want to process ingredients very briefly. Tips If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the blender jar and turn the control knob to pulse position a few times. Cut meat or other solid ingredients into smaller pieces before putting them in the blender jar. Do not process a large quantity of solid ingredients at the same time. To get good results, we advise you to process these ingredients in a series of small batches. To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the lid onto the rotating blades. Disassembling the blender 1 Remove the mains plug from the wall socket. Remove the lid with the measuring cup from the blender jar. Turn the blender jar with the blade unit attached to remove it from the motor unit. Clean all removable parts immediately after use (see chapter `Cleaning'). With the filter you can make delicious fresh fruit juices, cocktails or soy milk. [. . . ] Recipes Soy milk Note:This recipe can only be prepared with the filter (HR2006/HR2004 only). Always let the appliance cool down to room temperature after each batch you process. Ingredients 70g dried soy beans 600ml water 1 Soak the soy beans for hours before you process them. Then add some sugar and let the soy milk simmer until all sugar has dissolved. [. . . ]