User manual PHILIPS HR2099/90

[. . . ] Turn the rotary knob to a pre-set function you need (step 3 in Fig. € To adjust the cooking time, press -/+ button. See table below for adjustable cooking time. »» When cooking is completed, you will hear a few beeps. [. . . ] € It is normal that scratches occur on the heating element or the bottom surface of the blade unit after use. This does not affect the performance or life of the appliance. 15 – 35 minuti 15 – 35 minuti 15 – 30 minuti 15 – 35 minuti 30 secondi – 60 minuti Español Adjustable heating level LOW: MED: HIGH: Preparación del robot de cocina BASSO: MED: ALTO: Suggested recipe Tomato creamy soup Chicken soup Apple compote Bolognaise LOW: Keeping warm, melting butter for desserts or crepe pancake batter MED: Simmering, cooking small amount of ingredients like baby food or sauces HIGH: Boiling food faster Livello di riscaldamento regolabile 1 2 3 4 5 Monte el robot de cocina tal y como se indica (figura 3). 5) 1 2 3 4 5 Follow the steps in “Preparing your cooking blender”. Turn the rotary knob to the manual mode (step 3 in Fig. Adjust the heating level by pressing -/+ button and then press OK button to confirm. Adjust the cooking time by pressing -/+ button. »» When cooking is completed, you will hear a few beeps. turn the rotary knob to “0” position. € The LED display will turn off if there is no operation in 5 minutes. You can wake up the appliance and continue operating by pressing any function key. Remove the blender jar from the motor unit (step 11 in Fig. € This allows the heating element to cool down faster. Warning: Do not touch the heating element after cooking. Pour out the cooked ingredients/soup from the blender jar to avoid overcooking. 6) 1 2 3 Follow the steps in “Preparing your cooking blender”. When the LED display is blinking and showing 00:00, the appliance is ready to use. Turn the rotary knob to a speed setting (step 4 in Fig. »» The blending process starts and the blending time will count up on the LED display. Note: To avoid overheating, the appliance will turn off automatically after working for 3 minutes. [. . . ] Unplug the appliance and then pour out to empty the blender jar. rinse under tap to clean the blender jar. 3 4 3 4 Note: • Do not use any metallic or sharp-edged utensils on the blade unit to avoid scratching on the surface. € Do not use metal wool or brush to wash the blade unit to avoid scratching. [. . . ]