User manual PHILIPS HR 2172

[. . . ] Caution Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. Always let the appliance cool down to room temperature after each batch you process. [. . . ] Always let the appliance cool down to room temperature after each batch you process. Mill (HR2011/HR 2172 only) Warning Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice cubes. Do not touch the cutting edges of the mill blade unit when you clean it. They are very sharp and you could easily cut your fingers on them. Caution Never use the mill for more than 30 seconds without interruption. Let the mill cool down for at least 1 minute between processing cycles. Never forget to place the sealing ring in the blade unit before you assemble the mill jar, otherwise leakage occurs. always process cloves , star anise and aniseed together. If processed separately, these ingredients may attack the plastic materials of the appliance. The mill beaker may become discoloured when you use the mill to process ingredients such as cloves, anise and cinnamon. Filter (HR2004 only) Caution Never use the filter to process ingredients hotter than 80°C. 4 Clean all removable parts immediately after use (see chapter `Cleaning'). With the filter you can make delicious fresh fruit juices, cocktails or soy milk. The filter prevents pips and skins from ending up in your drink. You can order the filter for the HR2000 as an extra accessory from your Philips dealer. The blender jar can be mounted in two positions: with the handle on the right side or on the left side. Make sure that the grooves of the filter fit exactly onto the ribs inside the blender jar. 6 Switch off the appliance and remove the blender jar with the blade unit attached from the motor unit. 7 Pour out the drink through the pouring lip of the blender jar. Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds. Note:When you process a large quantity, we advise you not to put all the ingredients in the filter at the same time. Start to process a small quantity and let the appliance run for a few seconds. [. . . ] storage 1 To store the mains cord , wind it round the base of the motor unit. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. Guarantee and service If you need service or information or if you have a problem, please visit the Philips website at www. [. . . ]