User manual PHILIPS HR2305

[. . . ] , Prevent the ingredients from freezing onto the cooling disc to guarantee proper functioning of the stirrer. A spoon, into the bowl while the appliance is operating. , Never exceed the quantities indicated in the recipes. [. . . ] assembling the appliance 1 Remove the cooling disc from the freezer. Make sure your hands are dry when handling the frozen cooling disc. Do not rinse the frozen cooling disc, as this will cause a thick film of ice to develop on the outside of the disc right away!Insert the front edge of the motor unit into the cover. ) 5 Push the motor unit downwards into the cover until it locks into place (you will hear a click) (Fig. 7 Place the cover with the motor unit attached onto the bowl in the right position. Press the cover down until it locks into place and push the clamps towards the bowl until they snap home (you will hear a click). Making ice cream 1 Before putting the ingredients in the bowl, switch the appliance on by pressing one of the two buttons. thisisnecessarytopreventtheingredientsfromfreezingontothecoolingdiscrightaway. , If you want to make soft ice cream, press the 1 button. , If you want to make solid ice cream, press the 2 button. Pour the mixture of ingredients into the bowl via the opening in the cover. A spoon, into the bowl while the appliance is operating. Let the appliance operate until the pilot light starts blinking to indicate that the time required for preparing a standard quantity of ice cream has elapsed. [. . . ] Never immerse the motor unit in water nor rinse it under the tap. Tip: An extra cooling disc (HR2968) will enable you to prepare larger quantities or two different flavours. Environment , Do not throw away the machine with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. [. . . ]